#asmr

Hello there, 3speakers! The second step during the assembly of the instrument is to get the combination of sound board and neck on the solera mould. When we do, we add the wooden squares around the perimeter

Hello there, 3speakers! To start assembling the instrument, we need to get the neck and sound board together. This method of work is known as the Spanish method. It was popularized by Antonio de Torres.

Hello there, 3speakers! With the joint reinforcement nicely placed onto the back of the instrument, now comes the time to work it and add the bars. This is a task with many steps. We start by working on

Hello there, 3speakers! One important part before adding the bars to the back is reinforcing the joint we made for the ornament that adorns the back. For this we first need to address the thickness of

Hello there, 3speakers! With the structure of the head stock ready, we have completed the neck and can start assembling the parts. Before that, we need to make the other lid of the instrument, the back.

El 7 de septiembre estaré cumpliendo año, y con ese propósito, @lililuki me llevo a esta tienda súper cool en la cascada, llamada ilahui, quienes por cierto tienen muchos descuentos buenos, y se me había

Hello there, 3speakers! With the structure of the head stock ready, it's time to finish it adding the veneer and making the holes for the tuners. We take another approach using anchors to fix the veneer

Hello there, 3speakers! Time to get back to the head stock. This time we're getting the extensions at the sides of it to make it wider so we can finish its shape. Alongside with this, we need to cut those

love sausage dog and specially getting pampered. big fan of señorita Pandora and her care taker. Uploaded using 3Speak Mobile App ▶️ 3Speak

love to see puppies being pampered. this guy just know how to take care of his dogos. Uploaded using 3Speak Mobile App ▶️ 3Speak

Hello there, 3speakers! Once the pieces of the heel are on place, it is time to cut the slot for the sides with a saw. Then, it's all about shaping that heel. We start by cutting the parts we have marked

Hello there, 3speakers! With the first part of the neck completed, we can tackle the base structure of the heel. This goes on the opposite side to the head stock and it is where the sides close the body

Hello there, 3speakers! Once the cut for the base structure of the head stock is made, the next step is preparing to glue it back with an angle. This is to have more resistance to the tension of the strings.

A few minutes ago it rained and I had to wait for it to end. I am in the middle of a gardening task and I don't want to continue tomorrow. So I have used the time and recorded a short little asmr chill

Hello there, 3speakers! With the sound board ready, we can move to the next piece. This one takes quite some time since there are a lot of parts required to make a complete neck for a plucked-strings

Go to the Spanish version Hello there, 3speakers! Time to finish with the sound board. Last time, we had the reinforcements in place and then cut the bars for the top. Now, we glue, shape and sand them

Go to the Spanish version Hello there, 3speakers! Moving on with the works on this new sound board after working on its thickness. Now, it's time to make a hole in it. Yes, the sound hole! We'll use an

it's been raining here for few days now so I decided to took a short video, hope y'all like it Uploaded using 3Speak Mobile App ▶️ 3Speak

Go to the Spanish version Hello there, 3speakers! Starting with a new sound board. Even when the sound of cedar is usually very similar, not two pieces from the same tree sound the same. Not even from

Go to the Spanish version Hello there, 3speakers! I'm excited to announce the beginning of a new DIY project of an instrument that was commissioned this year. It seems crazy to only have one or two of