To design a LAN network we need to prepare the tool, and the tool includes some hardware devices, basic equipment is the router, Switch, Ethernet Card, Ethernet Cable and Modem.
Router: functions to connect the network to one another.
Switch: serves to connect a computer into a network.
Ethernet Card: Adapter for connecting cables for the computer to connect to the network.
Ethernet Cable: The cable we will use to connect the computer to the router, and at the end of the cable we have to install RJ-45.
Modem: tool that will connect us to internet.
the first step is to take the cable and then cut it as needed then set the cable order if we want to install the cross cable, the order is White-orange
Orange
White-green
Blue
White blue
Green
White-brown
Chocolate
then if we want to design the cable straight sequence as follows.
White-orange
Orange
White-green
Blue
White blue
Green
White-brown
Chocolate
then cut the cable very neatly so that the end of the cable touches the existing connectors on the RJ-45.dan cut and then crimping tool, crimping tool is a tool to lock or press the cable with RJ-45 so as not to loose again.and then the cable ready to use.
"Thanks For Your Time"
