[Esp-Eng] 👉 Elaborando Vallas o conos "no pare" 🚧 Elaborating Fences or cones no-stop.🚧
Recursos utilizados:
Madera
Tornillos
Pega blanca
Segueta
Taladro manual
Metro
Pintura
Brocha
Procedimientos reflejado en las imágenes:
Imagen(1)- Se picaron cuatro tablas rectangulares 2cm X 1cm con una altura de 75cm.
Imagen(2)- Se cortó una de sus puntas con un ángulo de 45° uniendo las dos con tornillos y pega, quedando en forma de triángulo, para mejor estabilidad le coloque soporte en el centro dando forma de una A obteniendo dos estructuras de la misma medida.
Imagen(3)- Para el ancho de la estructura se cortaron 4 tablas finas; 2 de 45cm X 16cm y las otras 2 de 45cm X 10cm.
Imagen(4)- Luego se procedió a fijar las tablas que picamos anteriormente, colocando las de 45cm X 16cm en la parte superior y las de 45cm X 10cm en la parte inferior.
Imagen(5)- Del mismo modo se colocaron las de su otro lado.
Imagen(6)- Se fijó con tornillos y pega quedando estable.
Imagen(7)- Luego de armar la estructura se lijo para dar mejor acabado y porteriomente pintar.
Imagen (8)- Pintando con un color amarillo.
Imagen(9)- Pasamos a realizar unas franjas con un color más oscuro de modo que de una apariencia de alerta.
Imagen(10)- para la parte superior decidí hacerle el logo del negocio.
Imagen(11)- resultado Final
Fotos tomadas con LG L42
Fácil sencillo y económico.!
¡Espero que te alla gustado
Muchas Gracias por tu visita!
Resources used:
Wood
Screws
White glue
Saw
Hand drill
Meter
Paint
Brush
Process reflected in the images:
Image(1)- Four rectangular boards 2cm X 1cm with a height of 75cm were chopped.
Image(2)- We cut one of its tips with an angle of 45° joining the two with screws and glue, leaving a triangle shape, for better stability I placed support in the center giving shape of an A obtaining two structures of the same size.
Image(3)- For the width of the structure 4 thin boards were cut; 2 of 45cm X 16cm and the other 2 of 45cm X 10cm.
Image(4)- Then we proceeded to fix the boards that we chopped previously, placing the 45cm X 16cm at the top and 45cm X 10cm at the bottom.
Image(5)- In the same way we placed the other side.
Image(6)- It was fixed with screws and glue being stable.
Image(7)- After assembling the structure was sanded to give a better finish and then painted.
Image (8)- Painting with a yellow color.
Image (9)- We went on to make some stripes with a darker color so that it gives an appearance of alertness.
Image(10)- for the top I decided to make the logo of the business.
Image(11)- Final result
Pictures taken with LG L42
Easy, simple and inexpensive!
I hope you liked it, thanks for your visita
Final result.
¡Apoyemos cada talento para impulsar el crecimiento!