iFlag for iRacing

Hej (Hello in Danish).

This project might be what water should have been to Egyptians when it was scarce on the Nile.

Easy to spot, helpful on track, this should be for other racing games.

iFlag, a software that allows the flags of a race to be represented in a dot display. It works as a visual aid for the track related information and runs only on iRacing.

Let´s move on

The project is composed of 3 hardware parts and a software.

Hardware parts :

Arduino Uno,
Color Shield V 1 . 1
RGB dot Matrix 8*8

The software is:

iFlag - https://github.com/simracer-cz/iFlag

The hardware

Almost anyone can assemble this but there´s an order on the assembly:

First, Arduino Uno

Arduino UNO board

Second, the Color Shield

Color Shield on top of Arduino UNO

The pins must fit exactly between these boards.

Third , the 8*8 Rgb Matrix

Bottom-up: 1. Arduino - 2. Color shield - 3. Rgb Matrix

Again, the pins must fit exactly and you should pay attention on this part;

to couple the Rgb Matrix to the Color shield one has to do it in such a way that the "1" seen on this first picture below, from the Rgb Matrix, must fit the "1" on color shield that has the blue label.

Color Shield

Let´s recap: Follow this rule and the unit will work perfectly.

There will be a number "1" on the 8*8 Rgb Matrix close to a pin; That "1" will have to connect to the number "1" on the color shield.

If you have done that it should be ready to work.

Should stay like this,

---

Arduino with acrylic box

---

Some more photos

Black acrylic cover

Another cover

At this point the unit is ready.

Here is another idea for an enclosure; http://www.thingiverse.com/thing:1215138

---

Next step: Software

The above images are only to make available an idea of a unit powered On as well as it´s visual impact.

Options the software delivers;

There´s no noticeable impact on computer performance due to software. The software just needs to be downloaded and extracted. When in the desktop, you just need to RUN it so no installer needed.

If this gadget pics your interest, read the provided files on the downloaded folder. They are easy to read and well explained.

You can also check the github page for that information too:

https://github.com/simracer-cz/iFlag

Thoughts on closing

A must-have gadget
I like the LED´s flashing, it is unmistakable
Small and compact unit
No need for external power
I like having it where i want
I like the easy software.

What should be included;

the software start with windows

Overall there is no point in not making a project like this one. It´s a win-win situation. Its a good peripheral accessory with a very easy assembly process and with software that is free, easy to use and updated regularly.

This is iRacing only.
Thanks to Petr Vostrel and all the people involved on this amazing gadget!

Stay well! Keep coming.