DIY a Simple Handle For Your Light Painting RGB LED Strip
-English Version-
Happy Friday Steemians!!! 馃殌
Today I bring you another simple idea to control your Light Painting LED strip using the same mini-controller RF scheme from last week's post Here and the handle of a construction Plastering Trowel.
In this tool I used a 4-battery AA battery holder to house them inside the handle and provide greater center of gravity. The RF mini-controller will be housed under the LED strip while the wiring, battery holder and the push button will occupy the inside of the workpiece handle.
Materials you need:
Mini controller RF 5V
Push Button Switch 6A125VAC/3A250VAC
Led Strip 5050 RGB 5V
Battery Holder 4XAA 6V
LED Strip Profile Cover (Optional)
Electronics Cable
Handle of a Mason Plastering Trowel
Rubber Tip
Electrical tape
Have a good day!!! 馃榿
If you would like to see and learn more about Light Painting your can follow our community work in "Lightpainters United" and follow 
-Spanish Version-
Feliz Viernes Steemians!!! 馃殌
Hoy os traigo otra sencilla idea con la que controlar tu tira LED usando el mismo esquema de mini-controlador RF de la publicaci贸n de la semana pasada Aqu铆 y el mango de una llana de construcci贸n.
En esta ocasi贸n utilic茅 un portapilas de 4 baterias AA para alojarlas en el interior del mango y que a su vez proporcionara mayor centro de gravedad. El mini-controlador RF ir谩 alojado bajo la tira LED mientras que el cableado, portapilas y el bot贸n pulsador ocuparan el interior del asa de la pieza.
Material necesario:
Mini Controlador RF de tira led 5V
Bot贸n Pulsador 6A125VAC/3A250VAC
Tira LED 5050 RGB 5V
Portapilas Doble Capa 4XAA 6V
Funda perfil para tiras LED (Octional)
Cable de electr贸nica
Mango de Pl谩stico Hueco de Llana de Construcci贸n
Contera de Caucho
Cinta Aislante
Tengan un buen d铆a!!! 馃榿
Si desea saber m谩s sobre Light Painting no dudes en seguir nuestra comunidad "Lightpainters United" en