Published via Ecency

Greetings to everyone! We have discussed the importance of drugs and chemistry of food in previous blogs. The chemistry in our everyday life related to cleansing actions and cleansing products can not be ignored from this section of discussion. So, today we shall be discussing about cleansing agents.

It is indeed very important for us to maintain cleanliness and personal hygiene to lead a healthy and disease free existence. Throughout the human evolution, mankind has sought various methods for cleansing purpose, but one such method that still stood strong is soap. For decades, soaps have played the key role in maintaining personal hygiene and cleanliness Soaps improves cleansing properties of water. They help in removal of fats which bind other materials to the fabric or skin.

alt

The earliest recorded use of soaps traced to ancient Babylon around 2800 BCE. Those early soaps were made from combination of fats, oils and ashes. But unlike now, these soaps were used to clean textile products rather than the body. The ancient Greeks, Romans and Egyptians later embraced soaps for personal cleaning and around the Middle ages, soaps become an important specialized trade.

Chemistry of Soaps

Soaps are the detergents used since long. Soaps used for cleansing purpose are sodium or potassium salts of long chain fatty acids, e.g., stearic, oleic and palmitic acids. Soaps containing sodium salts are formed by heating fat (i.e., glyceryl ester of fatty acids) with aqueous sodium hydroxide solution. This reaction is known as saponification.

alt

Source

In this reaction, ester of fatty acids are hydrolysed and the soap obtained remains in colloidal form. It is precipitated from the solution by adding sodium chloride. The solution left after removing the soap contains glycerol, which can be recovered by fractional distillation. Only sodium and potassium soaps are soluble in water and are used for cleansing purposes. Generally potassium soaps are soft to the skin than sodium soaps. These can be prepared by using potassium hydroxide solution in place of sodium hydroxide.

How Soap Cleanses

Soap's remarkable ability to cleanse lies in its amphiphilic nature, meaning it can interact with both water and oil-based substances. When soap is applied to the skin or any surface with dirt, oils, or other contaminants, its hydrophobic end attaches itself to the oily particles, while the hydrophilic end is drawn to water. As a result, soap effectively lifts away the dirt and oils from the surface, forming micelles that keep the impurities suspended in water. When rinsed off, the soap takes the impurities with it, leaving the skin or surface clean and refreshed.

alt

Source

Types of Soaps

Basically all soaps are made by boiling fats or oils with suitable soluble hydroxide. Variations are made by using different raw materials.

Toilet soaps are prepared by using better grades of fats and oils and care is taken to remove excess alkali. Colour and perfumes are added to make these more attractive.

Soaps that float in water are made by beating tiny air bubbles before their hardening. Transparent soaps are made by dissolving the soap in ethanol and then evaporating the excess solvent.

In medicated soaps, substances of medicinal values are added to enhance the overall properties. In some soaps, deodorants are added. Shaving soaps contain glycerol to prevent rapid drying. A gum called, rosin is added while making them. It forms sodium rosinate which lathers well. Laundry soaps contain fillers like sodium rosinate, sodium silicate, borax and sodium carbonate.

alt

Source

Soap chips are made by running a thin sheet of melted soap onto a cool cylinder and scrapping off the soaps in small broken pieces. Soap granules are dried miniature soap bubbles. Soap powders and scouring soaps contain some soap, a scouring agents (abrasive) such as powdered pumice or finely divided sand and builders like sodium carbonate and trisodium phosphate. Builders make the soaps act more rapidly.

Why do Soaps not work in hard water?

Hard water contains calcium and magnesium ion. These ions form insoluble calcium and magnesium soaps respectively when sodium or potassium soaps are dissolved in hard water.

alt

Source

These insoluble soaps separate as scum in water and are useless as cleansing agent. In fact these are hinderance to good washing, because the precipitate adheres onto the fibre of the cloth as gummy mass. Hair washed with hard water looks dull because of this sticky precipitate. Dye does not absorb evenly on cloth washed with soap using hard water, because of these gummy mass.

Conclusive thoughts

Throughout history, soaps have proven to be indispensable in maintaining personal hygiene and cleanliness. Their unique chemical properties enable them to effectively cleanse the skin, removing dirt, oils, and harmful germs. As an essential cleansing agent, soap continues to play a vital role in promoting good health and well-being in our modern society. So, the next time you wash your hands or take a refreshing shower, take a moment to appreciate the significance of soap as a time-tested and valuable cleaning companion.

We shall meet again :)

B I B L I O G R A P H Y

Chemistnotes

Aplustopper

Geeksforgeeks

Read My Previous Blogs:

Chemicals in Food : Debunking Myths and Ensuring Safe Consumptions |ChemFam #46|

SCRAP Giveaway | Terracore | Draw #5 |

Unveiling The Secrets of Antiseptics and Disinfectants |ChemFam #45|

What are Antimicrobials and Antimicrobial Drugs? |ChemFam #44|

Therapeutic Action of Different Classes of Drugs |ChemFam #43|

Introduction to Drugs and Drug-Target Interaction |ChemFam #42|