Good morning friends of this wonderful creative community #HiveDiy !!! I hope you are all very well. Today I bring you a very original job that you ask me from time to time, it is a pole dancer that my gymnastics teacher commissioned for a friend who had a birthday.
Buenos días amigos de esta maravillosa comunidad creativa #HiveDiy!!! Ojalá se encuentren todos muy bien. Hoy les traigo un trabajo muy original que de vez en cuando me piden, es una bailarina de caño que me lo encargó mi profesora de gimnasia para una amiga que cumple años.
I did this work based on a photo sent to me by the person who placed the order.
Este trabajo lo hice basándome en una foto que me envió la persona que hizo el pedido.
Materials
🎶 cold porcelain
🎶 vinyl glue
🎶 cuttings
🎶 rolling pin
🎶 Styrofoam sphere
🎶 wooden rod
🎶 Styrofoam cover
🎶 cutter
🎶 paper tape
🎶 silver acrylic
🎶 strass
Materiales
🎶 porcelana fría
🎶 cola vinilica
🎶 estecas
🎶 palo de amasar
🎶 esfera de telgopor
🎶 varilla de madera
🎶 tapa de telgopor
🎶 cutter
🎶 cinta de papel
🎶 acrílico plateado
🎶 strass
With the cutter remove a quarter of the sphere that will be the front of the face, also cut a portion on each side and cut in the shape of a "V" at the bottom.
Con el cutter quitar un cuarto de la esfera que va a ser el frente de la cara, cortar también una porción de cada lado y en la parte inferior cortar en forma de "V".
Make a skin-colored ball, flatten and place the carved sphere on the side that will be the front of the face. Close and gently mark the separation of the forehead and face. Mark the eye sockets, with a stake to push the dough to form the nose and the mouth.
Hacer una bolita color piel, aplanar y colocar la esfera tallada del lado que va a ser el frente de la cara. Cerrar y marcar suavemente la separación de la frente y la cara. Marcar la cuenca de los ojos, con alguna esteca ir empujando la masa para formar la nariz y la boca.
For the torso, make a ball, shape a blunt tear, flatten, in the widest part take out the neck, define the shoulders and bust and mark the navel.
Para el torso, hacer una bolita, dar forma de lágrima sin punta, aplanar, en la parte más ancha sacar cuello, definir los hombros y el busto y marcar el ombligo.
For the bra, stretch cold black porcelain in a rectangular shape, at the top cut into a rounded "M" shape.
For the panties, make a ball and shape a triangle.
Para el sostén estirar porcelana fría de color negro en forma rectangular, en la parte superior cortar en forma de "M" redondeada.
Para las bragas hacer una bolita y dar forma de triángulo.
For the hands, make two equal balls, stretch leaving finer at one end, mark in the middle and in one half mark a quarter for the hand. Cut in the shape of a "1" for the big toe. Remember to do a left and a right side.
For the legs repeat the step but with more mass and in the fourth mark the heel to form the foot.
Para las manos hacer dos bolitas iguales, estirar dejando más fino en un extremo, marcar al medio y de una mitad marcar un cuarto para la mano. Cortar en forma de "1" para el dedo grande. Recordar hacer un lado izquierdo y uno derecho.
Para las piernas repetir el paso pero con más cantidad de masa y en el cuarto marcar el talón para formar el pie.
For the hair, make a ball and hollow out. Make another ball, stretch into an elongated teardrop shape. Paste and make lines to simulate hairs.
Join all the pieces in the desired position, paint the eyes with acrylics or markers. Make up.
Para el pelo hacer una bolita y ahuecar. Hacer otra bolita, estirar en forma de lágrima alargada. Pegar y hacer líneas para simular los pelos.
Unir todas las piezas en la posición deseada, pintar los ojos con acrílicos o marcadores. Maquillar.
For the base, use two styrofoam covers, with the cutter remove the edges and join with paper tape.
Roll out the dough, cover the lid and remove the excess. Repeat the step on the other side. In the union, melt with water so that it is not noticeable.
Paint the rod with silver acrylic, let it dry and stick in the middle of the base.
Para la base, utilizar dos tapas de telgopor, con el cutter quitar los rebordes y unir con cinta de papel.
Estirar masa, cubrir la tapa y quitar el excedente. Repetir el paso del otro lado. En la unión fundir con agua para que no se note.
Pintar la varilla con acrílico plateado, dejar secar y pegar en el medio de la base.
Glue the finished piece to the base. At the end I added the name of the person and glued some rhinestones.
For this post I took photos with my Samsung Galaxy j4 cell phone and used the Collage Marker application and the Google translator.
I hope you liked it as it was a challenge for me because I rarely get this type of request. Greetings. Andrea❤❤❤
Pegar la pieza terminada a la base. Al final le agregué el nombre de la persona y pegué algunos strass.
Para este post tomé fotos con mi teléfono celular Samsung Galaxy j4 y utilicé la aplicación Collage Marker y el traductor de Google.
Espero les haya gustado ya que para mi significó un desafío porque rara vez me hacen este tipo de pedidos. Saludos. Andrea❤❤❤