Hello friends of the hive !!! I hope you are all very well. Today's proposal is to make Elsa from the movie Frozen.
Hola amigos de la colmena!!! Espero que estén todos muy bien. La propuesta de hoy es hacer a Elsa de la película Frozen.
I made this piece with images from the web and for the face I used a silicone mold.
Esta pieza la hice con imágenes de la web y para la cara use un molde de silicona.
The materials I used are: cold porcelain (light blue in various shades), Styrofoam sphere, a piece of Styrofoam, cutter, vinyl glue, cuttings, rolling pin, acrylics and brush.
Los materiales que usé son: porcelana fría (el celeste en varios tonos), esfera de telgopor, un pedazo de telgopor, cuter, cola vinilica, estecas, palo de amasar, acrílicos y pincel.
We carve the styrofoam piece into a cone shape. We stretch cold celestial porcelain, put vinyl glue on the cone and cover with the dough. We remove the surplus.
Tallamos la pieza de telgopor dando forma de cono. Estiramos porcelana fría celeste, ponemos cola vinilica al cono y cubrimos con la masa. Quitamos el excedente.
With the cutter we make a cut on the front of the sphere, one cut on each side and two cut on the bottom.
We make a skin-colored cold porcelain ball, put it in the mold and press the sphere that we cut out a little.
We cover all the styrofoam with the dough.
Con el cuter hacemos un corte en el frente de la esfera, un corte a cada lado y dos cortes en la parte inferior.
Hacemos una bolita de porcelana fría color piel, la ponemos en el molde y hacemos un poco de presión con la esfera que cortamos.
Cubrimos todo el telgopor con la masa.
For the torso we start by making a ball with cold skin-colored porcelain, we shape a tear without a tip, we flatten. At the top we flatten as if it were a ramp. we mark the neck and shoulders. Finally we mark the breasts.
We stretch a lighter light blue dough, cut it into a rectangle and glue it above the breasts.
Para el torso empezamos haciendo una una bolita con porcelana fría color piel, damos forma de lágrima sin punta, aplanamos. En la parte superior aplanamos como si fuera una rampa. marcamos el cuello y los hombros. Por último marcamos los senos.
Estiramos masa color celeste más claro, cortamos en forma de rectángulo y pegamos por arriba de los senos.
With acrylics we paint the face. We make the eyelashes with black microfiber and the eyebrows with a brown pencil.
Con acrílicos pintamos la cara. Las pestañas las hacemos con microfibra negra y las cejas con un lápiz color marrón.
For the ears we make two equal balls, we shape a roll, we flatten and in one of the ends we make the own marks of the ears.
For the hands we make two equal balls, we mark the wrist, we flatten. At one end we cut in the shape of a "1" to separate the palm of the finger. Finally we mark the four remaining fingers.
Para las orejas hacemos dos bolitas iguales, damos forma de rollo, aplanamos y en uno de los extremos hacemos las marcas propias de las orejas.
Para las manos hacemos dos bolitas iguales, marcamos la muñeca, aplanamos. En uno de los extremos cortamos en forma de "1" para separar la palma del dedo. Por último marcamos los cuatro dedos restantes.
For the hair we make a ball with yellow dough, we shape a helmet. We stretch three strips to form the braid. With small balls that we give a teardrop shape, we make the locks.
Para el pelo hacemos una bolita con masa amarillo, damos forma de casco. Estiramos tres tiras para formar la trenza. Con bolitas pequeñas que damos forma de lágrima hacemos los mechones.
For the arms we make two equal balls in light blue color. We stretch into a cylinder shape.
Para los brazos hacemos dos bolitas iguales en color celeste claro. Estiramos dando forma de cilindro.
For the corset, we stretch mass of the same light blue that we used for the cone (I added a toning powder to give it shine). At the top we cut almost like a heart and at the bottom like a "V".
For the layer we stretch very light blue cold porcelain and cut it in the shape of a triangle without a point.
Para el corset, estiramos masa del mismo celeste que usamos para el cono (le agregué un polvo tonalizador para darle brillo). En la parte superior cortamos casi como un corazón y en la parte inferior como una "V".
Para la capa estiramos porcelana fría celeste bien claro y cortamos con forma de triángulo sin punta.
We join all the parts with vinyl glue. I added a snowflake to which I put a bit of glitter.
I hope you liked it, for my part he is a character that I like although it still does not come out very well.
But as I always tell you, you have to cheer up. Greetings. Andrea ♥♥♥
Unimos todas las partes con cola vinilica. Agregué un copo de nieve al cual le puse un poco de brillo.
Ojalá les haya gustado, por mi parte es un personaje que me gusta aunque todavía no me sale muy bien.
Pero como siempre les digo hay que animarse. Saludos. Andrea♥♥♥