Shopnilhasan here to discuss with you about ATM machine main parts. I am an Engineer and doing job as Technical support Engineer at reputed ATM machine sales and service company. I love my job very much and try to do it with the utmost attention. In fact, I can say that it is truly a joy to do something I love and do it with great pleasure, which helps me to move forward constantly. I work on a machine that is a combined machine that combines electrical, mechanical, electronics, networking, and software. This machine constantly presents me with new challenges, but I deal with them with the utmost efficiency and move forward.
Today I will again discuss with you some of the important parts of an ATM machine. In fact, ATM machines are very complex and made up of various delicate devices. You won't be able to work well here unless you have a good knowledge of this machine. I have been working on this machine for a long time and because I have a good understanding of it, I am constantly able to solve its problems. Anyway, let's go over the various subtleties of ATM today.
This screw is one of the most important spare parts of the CRM machine. To be honest, it is not possible to run this CRM machine without it. When a customer deposits money in a machine, the money first comes to this screw and is stored there. Then the machine decides whether to deposit the money or not. When the machine makes its decision, the money is transferred from the screw to the cassette kept inside the machine. Again, when the customer goes to withdraw money, the money first comes to the screw and is stored there, and then when the machine decides to give the money to the customer, the money comes out of the screw and reaches the customer. This means that you can understand how important a part the screw is, without it the machine will not run.
The screw is one of the parts of the CRM machine in which the money is stored through a tape. About 200 notes can be stored in this roller at a time. There are three tapes in the screw and the money enters these tapes and all the money starts to accumulate in this roller one by one. When a customer deposits money, first 200 notes are gradually deposited inside this screw through the father and when the machine decides that it is time to deposit the money, the money goes inside the cassette from here and the money is deposited. Again, at the right time of withdrawing the money, the money is given to the customer from the screw.
This screw is very important for a machine, but sometimes this screw puts us in great danger. There are three thin strips inside this screw, in which the money enters and gradually the money starts accumulating inside. These threads break or get damaged after a certain period of time. Then this machine is no longer operational and our engineers are sent here to work. Then we go there and open this screw and change the three strips inside it. To be honest, this task is much more difficult to do than it sounds. However, we use our talent to complete this task very quickly and start the machine again.
This was my plan for today. I will be back with more great content very soon. Thank you very much for taking the time to read today's post, I hope you will stay with me in the next episodes.
I am Shopnil Hasan, From Bangladesh. My hobbies are gardening and traveling to new places. I am nature lover. Love and Simplicity is my power βοΈ
