Shopnilhasan here to discuss with you about ATM machine main parts. I am an Engineer and doing job as Technical support Engineer at reputed ATM machine sales and service company. I love my job very much and try to do it with the utmost attention. In fact, I can say that it is truly a joy to do something I love and do it with great pleasure, which helps me to move forward constantly. I work on a machine that is a combined machine that combines electrical, mechanical, electronics, networking, and software. This machine constantly presents me with new challenges, but I deal with them with the utmost efficiency and move forward.
Today I will again discuss with you some of the important parts of an ATM machine. In fact, ATM machines are very complex and made up of various delicate devices. You won't be able to work well here unless you have a good knowledge of this machine. I have been working on this machine for a long time and because I have a good understanding of it, I am constantly able to solve its problems. Anyway, let's go over the various subtleties of ATM today.
What is Crm Pocket?
The pocket in the machine is the part where money is deposited and withdrawn. Special care has to be taken while depositing money here because if someone messes up the money, gives money with a pin or gives money in a rubber bundle, then this machine will not accept that money and the whole money will be messed up. This pocket is a very important part in the CRM machine, without it, no money can be withdrawn or deposited. Friction technology has been used in this pocket through which it works smoothly and transfers money to the customer.
First, after giving a command to the machine, the pocket lid opens automatically. Then, if the customer wants to deposit money, seven or eight openings open on the pocket, after which the customer has to put the money inside the pocket. In this case, the customer must be careful so that the bundle of money is not pinned or wrapped with rubber. Moreover, the money must be placed there in a perfectly parallel manner. If it is placed randomly, the machine will not be able to accept the money properly and the transaction will be considered invalid. Then, various types of sensors and cameras secured in this pocket try to transfer the money to its correct place. If everything is correct, the money is transferred to its correct place and the entire transaction is counted as successful. And when withdrawing money, after the customer gives a command, the money is deposited in the pocket and the customer receives the money from there.
The pocket in the machine is the part where money is deposited and withdrawn. Special care has to be taken while depositing money here because if someone messes up the money, gives money with a pin or gives money in a rubber bundle, then this machine will not accept that money and the whole money will be messed up. This pocket is a very important part in the CRM machine, without it, no money can be withdrawn or deposited. Friction technology has been used in this pocket through which it works smoothly and transfers money to the customer.
This was my plan for today. I will be back with more great content very soon. Thank you very much for taking the time to read today's post, I hope you will stay with me in the next episodes.
I am Shopnil Hasan, From Bangladesh. My hobbies are gardening and traveling to new places. I am nature lover. Love and Simplicity is my power βοΈ
