Inspired by the amazing work that DMScotty showcases on the regular at his YouTube channel, I decided to dust off my soldering iron and start doing some tabletop props using LEDs!
Working off ideas Scotty-senpai showed in his video, aptly named: Craft tea lights into light sources for D&D, I made a cozy campfire, so I can put it on the table whenever the characters are taking a full rest.
Unfortunately I didn't take pictures during the the craft, so you'll just have to trust me ;)
Even though you can mount a 5mm LED directly on a CR2032 battery, due to it's high internal resistance (add a magnet and you have a throwie), you should add in a resistor, because it really helps to to make the battery last longer, with no noticeable light intensity drop.
I opted for getting the LEDs and mounts directly, instead of trying to repurpose the Dollar Tree tealights (don't have those where I live), I also wanted to give it a smaller footprint on the table, so it only used as much space as it was necessary to house the battery. I do admit that using the ready-made tea lights would save a lot of work though. If you're going the DIY route, make sure to test the polarity of the LED before soldering (just test it, connecting it wrong won't harm the LED or the batteries).
If you need a soldering primer, check out Hankerin's video and just remember the mantra my trade school teacher told us back in the day:
Iron in
Solder in
Solder out
Iron out
I closed off the base with a strip of cardboard, scored between the corrugations.
For coals, I added some actual charcoal I salvaged from a broken water filter, painted them yellow and then drybrushed orange and then topped off with a little red.
For the logs I used toothpicks, stained with bitumen.
As for the fire, I used my glue gun and while holding the piece upside down, teasing the glue down with the heated tip.
I really like the effect that the flickering LED gives, our brains are really wired to pay attention to changes, so the flicker really traps our attention.
The great thing about integrating electronics into your projects is that it opens up a whole new dimension or possible interaction and effects, and lighting up LEDs with coin batteries is safe and easy enough to get anybody started.
Let me know if you have any other cool ideas!
Have fun crafting =)
