Mechanics In terms of mechanics matter is either a solid or a fluid (gas being a type of fluid) or exhibiting some measure of behavior of both states. Difference Between Solids & Fluids The mechanical

The Acceleration Vector For a Particle The purpose of the following is to determine the acceleration of a particle over time in a flow field based on its 3 dimensional vector. Image from the National Committee

Damen 5009 Model: Test Basin After finishing the model, it was launched and tested in different wave conditions. At the end of the video is some footage of the full size vessel under way. ▶️ DTube ▶️ IPFS

The Sea Axe: Strip Planking and Sheeting the Hull We had two choices for the hull, plank with Balsa or Tasmanian oak. The Balsa is much easier to work with in terms of cutting accurately sized sheets;

The Sea Axe: Keel Beam & Frame Assembly The construction begins with the assembly of the frame designed prior, we where advised that tabs of 3.5mm were required for the 3mm card; I suspected that this

As humans, the feedback we receive from the environment is processed and used to better develop our insight and help us make more more effective actions. It is this flow of information and our ability

I'm pleased to announce that eating elephant is vegan-friendly, gluten free, dairy and nut-free, will satisfy raw food eaters, is not genetically modified and is dolphin-friendly. In fact no animals are

I have noticed an increase in debate on whether the world is actually flat, with many proponents putting considerable effort in attempting to provide plausible arguments for a flat earth. The following,

The Age of Distraction In 1931 Aldous Huxley published his legendary novel, A brave New World, in which he predicted that by 2030 the Western world would live under a frightful dictatorship. Three impersonal

All the world will be your enemy, Prince with a Thousand Enemies, and when they catch you they will kill you... ...But first they must catch you. There were two events that for some reason (1) Stuck in

Today, I had visitors from Japan. I took them to the restaurant in Palmcove. Palmcove is located about 30min drive north from Cairns, NQLD Australia. I have been to many restaurant in Cairns but this is

The Sea Axe: CAD Modelling As this project & subject is somewhat introductory, we are mainly concerned with modelling (no analysis) and therefore have had a look at a few applications namely; Maxsurf [by

The Sea Axe: Ship Design & Construction Project Ship Design & Construction is a second year subject, it is a bit lay back and the intention is to familiarise ourselves with different industry CAD software,

Fluid Dynamics Introduction What Is a Fluid? Solids: A solid can resist an applied shear stress by deforming and the stress is proportional to the strain. Fluids: Are liquids or gases, they deform continuously

The Route I have always loved being outdoors and enjoying what our surroundings offer, you don't have to be scaling cliffs to get an appreciation of the outdoors, you just need to get out a bit at a time.

I accidentally ruined the formatting on this post when I tried to edit it.  I have reposted it.

Following on from a post I made about activewear yesterday I thought I'd follow it up with another fashion-related post today. You can see that post here: Today I went for a drive in the Adelaide Hills

First Things First Arrived back at my sharehouse, it is bloody cold and there's a bit of rain, have a bit of washing to do as well, lucky it cleared up over the weekend. First thing was to get my car started,

Introduction Hello guys, I have decided to join you all on steemit, I am not really a supporter of social media, however I consider this more blogging than social media. Steemit is a great idea that appears