Hello, fellow HIVErs! If you have been following my posts, you will know that I have started a vegetable patch in the garden. My previous DIY was something for the vegetable patch, DIY Plant Markers. Today's post is again something for the vegetable garden, a DIY self-watering system created from plastic bottles.
The self-watering bottles in action.
It started with my spinach, which is growing like crazy! This is of course great! But it also means that the spinach plants are using a lot of water with their big green leafy goodness. I usually check if any of the plants need water once a day or every second day. The spinach, however, was needing a lot more water than that. There was more than once when I checked in on them, to find them wilted and looking very thirsty.
This isn't unusual, given they get a lot of sunlight and their large dark green leaves transpire a lot. In combination with the current growth the plants are undergoing, they need more water than most of my other veggie plants.
But who has the time to spend all day checking on their plants? I love going to check on them, but life doesn't always allow that. So I had to figure out a way to get water to them a little more reliably.
As I don't have a job at the moment, my budget is zero. Sure it would be great to go out and buy a drip feed system, but I just can't do that. In addition, I have a great love for crafting as well as recycling wherever I can. So without further ado, I dove into what I had lying around and made a plan.
For this project, you will need:
The supplies for the DIY.
I am using two 440ml Coca-cola bottles. I took off the label and rinsed out the bottles to make sure there was no soda residue left in them. I am making use of a flat-nose pair of pliers. The candle can be any candle you have, as long as you can get easy access to the flame. I am using a simple tealight candle. You can see the needle next to the pliers. Please excuse my outdoor crafting table, it has been used to spray paint a lot, haha.
The process is pretty simple, but I do need to caution you around it. You will be working with a flame and heating a needle, so there is a risk of burning. Definitely not something you want to allow young children to do. Older kids might be okay with supervision, but please use your common sense. I can't be held liable for any burns you may happen to get. I already have enough risk dealing with my own stupidity (and clumsiness), I can't shoulder yours as well! 😂
Heating the needle and pushing holes into the plastic lid.
First, light your candle. If you are going to work outside, you want an area that isn't windy. Use the pliers to grip the needle at the back and hold it near or just into the flame of the candle. This is to heat the needle so that it will easily go through the plastic.
I was not sure which side of the bottle would work better so in one bottle I put holes in the lid and in the second bottle I did holes in the bottom.
Pushing holes in the bottom of the bottle.
For these test bottles, I did three holes each. Three in the bottle top and with the second bottle, three in the bottom, spaced out. Do not touch the needle during this process. It is heated metal and will burn you. If the needle does not go through easily, reheat the needle in the candle flame and try again.
And that's it! Your self-watering bottles are ready to be put to use. All you need to do now is fill the bottles with water and place them at the plants you want to be watered.
I am going to go over my experience with these self-watering bottles to give you a better idea of what might work better for you.
The upright bottle was definitely the more stable of the two. I buried it partway into the soil near the plants I wanted it to feed water to. You should see an occasional air bubble rise in the bottle which is a sure indication that water is seeping out into the soil. It is also easier to refill with water as you simply remove the bottle cap and pour water in without needing to disturb the soil at all. The biggest drawback of the upright bottle is that it takes up a fair amount of space.
This one took less space, so it may be more suited to smaller pots. Yet I found it to be pretty unstable even after I buried part of it. So it may require extra items to stabilize it, such as a stake to which you tie the bottle to. I found it released water less reliably, and I had to move the bottle around a little before getting a regular air bubble to pulse. The other major drawback of the upside-down bottle is that to refill it you would need to remove it from the soil completely to take the cap off.
Side by side of the two self-watering bottles.
I have since made a few more of these bottles to use in my veggie patch, specifically around the seedlings which need to stay slightly moist for optimum growth. I expanded on the above using the upright bottle. Here are some things to keep in mind:
My expanded self-watering (currently empty).
As a last bonus, if you are looking for a quick way to make a DIY watering can of sorts, use the same method to poke several holes in the cap of a larger soda bottle. I used a 2l one. Fill the bottle, replace the cap, turn the bottle upside down and voila, instant watering 'can'.
All the plastic bottles, your self-watering ones, and the watering 'can' will eventually succumb through use and exposure to sunlight. This means you will eventually have to replace them. With the watering 'can' you can keep the cap, which will likely last longer and just put it on a new bottle. The same applies if you are using upside-down bottles for self-watering.
If you are using the upright bottles, you will have to go through the process of heating a needle and poking holes again. At least it is quick and easy.
This quick and cheap self-watering system may not be the most efficient or high-tech, but it definitely has helped. Since installing the bottles into the spinach pot, I have not gone out to find wilted spinach except for one occasion where the upside-down bottle's holes somehow got clogged and the water had not been released. It makes a good stop-gap watering system to help keep the soil moist when I am busy with life. As I said before, it is not a way to replace normal watering, so please keep that in mind. I don't wish to be held responsible for plant babies dying off!
Thanks!
As always thanks for stopping by and reading my post! I hope you found it helpful in some way.
Credits:
