Keychain with Resin 👍🌹

Greetings

Hopefully you all are doing well. Actually I had told you all that I had started a business of resin art. And Alhamdulillah I have done 4 orders within two weeks. I made. A beautiful keychain of resin art. It was an order of my cusion. He asked to made a whole vedio of the process of his keychain. Because it is a trend. So it was difficult to made vedio because I had not any ring light. So I bound the mobile with the help of the staller to myself and on the camera. I was thinking that I should shared my process and my work with you all. So I took ss from the vedios . I just gave the crystal look to the keychain. It was the customer's demand. Here I had shared the final look of the keychain.

If anyone want to order something of resin . He can order ☺️☺️within pakistan

        **Final Look**

HereI had shared the whole vedio of the process.

Material

There is a lot of material used to made resin. So I had shared a little list of the resin material and a picture.

Resin liquid

Hardner

Wooden stick

Disposable glass

Mica powder

Mold

Keychain rings

Process

First of all I took a little amount of the resin and mix a half amount of the hardner to the resin. Here I had shared a picture.

Then I started to mix it for 5 to 6 minutes putting in hot water. When we mix resin the bubbles creat in it. So I tried to mix it welly . Here I had shared the picture.

Them I started to drop this mixed resin into the mold of the A. I just filled the A mold with half. I had shared the picture here.

I added a plastic bag into A mold for the crystal look. I let it dry. After 3 to 4 hours it dry. Then I started to remove the plastic tranparent bag from it. Let me show you all

Then I started to add the add some white mica powder in it. For the crystal look. I had shared the picture here . During adding the mica powder. I just spread the mica powder into the A.

I started to add some red mica powder into the resin liquid which I mixed again. I drop some mica powder into it. Let me show you.

Then I add the red resin into the A. Let me show you.

I just adjust it with the wooden stick. Then I let It dry. The picture I had shared here in it I demold it.

Then I attached the keychain ring with this A which I had made with resin. It is almost complete. Here I had shared the final picture. You can see that It is looking like crystals inside a glass of red colour