Step 9. Once back at a command Prompt, time to setup the config. Type:
./go.sh
Step 10. Answer the questions with your Desktop Wallet GET CONFIG information
Step 11. Once back at command prompt, Type:
reboot
Type neutrond
(test with: neutrond getinfo)
(IF cannot connect to server, Give it a moment and try again.)
Ensure its working When you use neutrond getinfo, look at the blocks. Make sure its up to date, Over 1017695. Check the latest Block Number BLOCK EXPLORER
Step 12. Click START on the Desktop Wallet to ACTIVATE the Masternode
Must say "Node Started" before continuing
(IF NOT, check Config. Make sure transaction of EXACTLY 25,000 Neutrons has 15+ confirms)
Step 13. On the VPS, type command: neutrond masternode start
Step 14. If you see, "Masternode Remotely Started" then your done.
neutrond Controls
neutrond =========================== Start Cold Wallet
neutrond getinfo ==================== on wallet status
neutrond masternode start ============ Start Masternode
neutrond masternode list ============= List Of Masternode IP's
neutrond listreceivedbyaddress 0 true === List of Address that Received Coins
neutrond --help ====================== MORE COMMANDS
neutrond stop ======================= Stop Neutron Wallet
To Edit the neutron.conf Manually:
nano /root/.neutron/neutron.conf
make your changes
Save the changes you've made, press Ctrl + O . To exit nano, press Ctrl + X . If you exit from a modified file, it will ask you if you want to save it. Just press Y, It will then ask you for a filename. Press Enter You can now exit the Desktop Wallet.
Open it every few day to sync and Receive the REWARDS!!!!
MAKE SURE YOU UNLOCK YOUR WALLETS MAKE SURE YOU UNLOCK YOUR WALLETS MAKE SURE YOU UNLOCK YOUR WALLETS
****Both Desktop & VPS neutron.conf Must MATCH****
