Clean the polycarbonate sheets only with water and neutral soap. Do not use abrasive or items to scrape, as it will alter your surface. Use a sponge or soft cloth with care.
To keep the shine and beauty of the polycarbonate alveolar cleaning is recommended periodically (minimum every 6 months) with water. You need to dry them immediately with a rag of flannel, or chamois.
Don't clean the plates under the intense sun or very high temperatures. Neither the keys with steam. Do not use abrasive cleaners, or alkaline, brushes, pads, brooms or sponges.
Do not expose the material to chemicals such as varsol, benzene, gasoline, thinner, acetone, carbon tetrachloride, muriatic acid or silicones are not recommended for polycarbonate.
Let the polycarbonate sheets on a flat surface and in a locked place. If you must leave them outside, cover with polyethylene sheeting white reflective opaque. It is recommended to stack them steep, supported one against the other, against the wall. If the stack is horizontal, the maximum height of the stack should not exceed one meter high.
In the manipulation it should prevent scratches due to rubbing.
It is very important to maintain the sheets in the shade to prevent the sun's rays cause the protective film to adhere to the material, especially when these are carried to the work.
Keep them at least 20 inches off the ground.
