FLJ T113 electric scooter - super ultron - ultra ultron v2
Patinete electrico flj, trotinete electrica ALLIGATOR ELECTRIC SCOOTER
Sold in this store 5 stars
https://www.aliexpress.com/store/4424...
Battery voltage and % chart
https://nunomartins5eja.tumblr.com/po...
To enter display programming mode press and hold the "POWER" AND "MODE" BUTTON at the same time while the scooter is ON. Then use the "power" and "mode" buttons to scroll through the different P settings
P1 Low Voltage cut off makes the battery to stop giving power at a certain voltage I got mine at 500, means 50v, it’s a 60 v battery and charges up to 67.2v meaning its 100% full at 67.2v, 50% at 57.6v and 0% at 48v(empty battery)
P2 Motor Pole Pairs 0-14 (13) leave 13
P3 Speedometer set (leave at 0)
P4 MPH or KPH 0 or 1 (0) leave 0 to KMH
P5 Kickstart 0 or 1 (leave at 0) Get moving with feet and then accelerate or not, the just accelerate
P6 Cruise Control (leave at 0) sticky accelerator after a few seconds i have it off (0)
P7 Power Start 0 or 1 (0) Use 0 to get a more controllable power up speed, if 1 then power comes faster more dangerous
P8 Power Level Setting 1-100 (100) leave at 100
P9 Regenerative Braking 0,1,2 or 3 (0) use 0 if you are getting used to the scooter, then use 1 to help with breaking with motors and regen, save the disk brakes make them last longer.
P0 wheel size diameter (10) leave 10
