I invite you to familiarize yourself with the stages of creating a picture. The set of methods that I will use to create a picture I created for myself a couple of years ago.
In the Russian-speaking space, I could not find information on how to create such a picture from beginning to end. I learned about this direction in art on Instagram thanks to artists from all over the world))) I watched their publications, read their explanations. And by trial and error, I found my" own " way to achieve the desired result.
Base. That's what I create the picture on. I chose plywood made of wood. The thickness is 6-8 mm. I buy a huge sheet from a hardware store and ask them to cut it into the pieces I need. The proportions are approximately as follows: 2 parts of glue, 0.5 parts of water, half a teaspoon of oil. I add acrylic paint to them. I always try to save money and put less)) Except for the white one. You need to add a lot of white paint.
A container for pouring paint on the canvas. (The jar at the top left) In this container, we freely and easily pour the prepared paint.
The pigment. To create a color mass, I make a mix of several components. Polymer glue, acrylic paint, synthetic oil, water.
A place to work should also be special. Since the method involves pouring paint, you need to be prepared for everything. Cover the surface with a protective film or paper. A rag for wiping your hands.
For this format, I will need to collect half a jar of paint. From a limited palette of colors, I make a mix in an additional container.
To make the paint spread well on the surface, I add white paint to the corners. And I continue to pour the paint in layers in an additional container.
I spread the white paint over the corners of the blank. And finished gaining color mass.
Perhaps this is the most extreme place in the creation of the picture. Need to turn the jar over with a sharp movement and put it on the blank. We wait a bit for the paint to glass off the bottom of the jar.
Slowly remove the jar.
It turns out a magic puddle)
Now for a while, I'm giving her the opportunity to live her personal life.
Gradually, the paint spreads over the surface.
More patterns and colors appear. We see how bubbles naturally appear.
I'm tired of waiting for the paint itself to cover the entire surface. I tilt the surface to help the paint disperse.
To make more bubbles, need to use a burner. A couple of seconds is enough. The hot air bursts the air bubbles, and splits the oil.
This is the result of the fire treatment.
Here's what happened in the end. It remains to wait until completely dry. Approximately 12 hours.
Was it interesting to look at the stages of creating the picture?