Hope everybody is well. This is my new 3D model. This is a Cylinder-shaped Cabins. This shape is a little unique. I got this inspiration from a design like this. It is a cabin made of bamboo. That too in the shape of a cylinder. Which is why I was able to do this design so easily. There was just a picture of this shape but I had to make it in that shape. I didn't make it a direct cylinder shape. I first made it into a round shape. Because it is much easier to make a round shape. It is 15 'wide and 20' long inside. It has to be made in a few steps. And all the wood textures have been used here. If you notice this design, you can see that the lower part of the wall and the upper part are not joined together. There is a gap in between. Thin wooden sticks have been used on the outside of this wall. And a circular thick wood from the outside has been used to hold all this. Which can be seen from one side of the room but the other side is given outside the wall. It is provided in such a way that there is no problem to set according to the bed position. And there are no windows or doors. Fully open. It is made much higher than the ground. And there are 20 steps on the stairs. I put it on a beach. And outside a barbecue stove and dining table. I tried to decorate the inside of the cabin using a few furniture. I have collected this furniture from 3D Warehouse. And to make this model, I have used sketchup 2021 and lumion 7.5 software. I have created this environment around it using my own thinking. I hope you like it.
