Source: http://diysome.web.fc2.com/FE/Hajime/index16.html
Characteristics and various aspects of free energy technology development
Chap.16. Weight change, gravity, and buoyancy 1. Weight change due to permanent magnets
2. TT Brown's electrodynamic flotation device
3. Weight change due to Tesla coil action ←…not yet
4. The Hutchison effect, which arose from Tesla's research on longitudinal electromagnetic waves 5. Floating Kowski-Frost Cooling Interferometric Crystal Resonator
6. V. Grebenikov: Anti-gravity flight due to insect cavity structure effect
7. Tesla high-voltage, high-frequency pulses cause spatial solidification
8. Controlling the gravitational field with superconducting coils by Professor André Husfa (Belgium) 9. Kramer Report on the Disappearance, Reappearance, and Antigravity of Objects
Chap.16. Weight change, gravity, and buoyancy
The main future breakthrough in the field of propulsion will be the ability to travel to distant planets in simple ways that we never thought possible, using magnetic and cosmic forces (Jeanne Dixon).
The above prophecy is merely a prophecy, and we must make scientific efforts to make this dream a reality. Although it is a prophecy, this is about electromagnetism and
cosmic energy
This seems to suggest that research on this topic should be promoted more.
Coffee break
The terms anti-gravity and inverse gravity are used in a mixed manner in the literature. There is no academic definition of what to actually call it, so it is written exactly as it appears in the literature. The author thought it was buoyancy. This, too, is certainly not an academically authoritative decision. So, it's all wrapped up, but I also use the word "floating."
First, let's start with an article about weight change caused by permanent magnets. This was published in the literature [1.1].
The experimenter measured the weight change of two samarium-cobalt ring magnets placed in a single nylon bolt with the same polarity facing each other and the opposite polarity facing each other (＝attraction) using an electronic balance (sensitivity 0.0001g) (Figs.1.1 & 1.2).
When the air gap d between both magnets, the orientation of the bolt (heaven and earth, north, horizontal west and east directions), and the shielding effect of a magnetic material (Mu 80) that has the effect of shielding magnetism were investigated, the weight of both was reduced. There was a tendency for the N-N opposition to decrease more than the SS opposition.
In addition, the orientation of the bolt tends to decrease significantly more than the horizontal direction (west, east) in the case of the direction of heaven and earth and the direction of north. The shielding effect of Mu 80 metal and the effect of d were less obvious.
Editor Alexander V. According to Frolov, "I think this article is another thing that relates magnetism to the aether. In his experiment, he says, we can assume that the density of the ether is caused by magnetism and that the weight change, albeit very small, is occurring."
(Impressions):
It should be noted that, as has been said many times before, the concept of ether in this field is quite nuanced compared to the concepts of ether covered in current physics textbooks.
It is known that ether clings around magnetic poles. Attempts at such measurements seem important, as ether density may have even a small effect on weight, but experimental data and consideration of the lack of influence of magnetic fields on digital balances are needed. And I think the Mu 80 metal we're talking about here is what we call permalloy in Japan, which I don't think shields static magnetic fields. So, since there was no difference, let's go ahead.
Literature:
[1.1]LAB REPORT ON SmCo RING MAGNET EXPERIMENTS:New Energy Technologies No.4(7)2002, pp.41-51 2. TT Brown's electrodynamic levitation device
This is a citation of what is stated in the literature [2.1].
TT In a letter (November 1, 1971) written by Brown (Thomas Townsend Brown) to electrical engineer Tom Turman, he states that in a test of an 18-inch diameter disk, we obtained buoyancy of 125% of its weight. Fig.1.3 is a sketch that was written in a letter.
Fig.1.3 Sketch of an electrogravity disk in a letter from Brown, reference [2.1]
The larger electrode was made from an umbrella-shaped balsa covered in aluminum foil. As shown in Fig.1.3, the umbrella and negative electrode were insulated with thin glass at the central axis. When applied at 170 kV, the lift force was 125 g. The electrode structure itself was about 100 g. So, in practice, it was self-emergence.
In March 1960, a report by the Electrodynamics Society entitled "Electrical Hydrodynamics" presented this test model, showing toroidal air vortices (Figs.1.4 & 1.5).
(Impressions)
This vortex now says ion wind It would be about. When a high voltage is applied between the electrodes, the discharge causes the movement of ionized gas, which generates wind (ionic wind). This is a phenomenon in which thrust is generated on the electrodes. This was first discovered by Thomas Townsend Brown in 1928. The paper was co-published by Paul Alfred Biefeld, who also worked on it. Therefore, Biefeld-Brown effect (Biefeld-Brown effect, BB effect).
It was introduced to Japan at the Japan World Exposition (March 14, 1970 ～September 13, 1970 as a mysterious device for floating objects. Currently, this type of flotation device Lifter Or Ion Craft Various studies have been conducted on this topic [2.2-2.3].
This method has only been able to levitate a model-like flying vehicle made from a combination of light balsa wood and aluminum foil. It is far from being practical. When performing this experiment, careful attention should be paid to high voltages and discharge products.
By the way, there was a rumor that charging the capacitor would make it lighter, so I checked it. We used capacitors sold as electronic components and tested various types by applying the rated voltage. An electronic balance with a sensitivity of 0.1 g was placed on a plate made of Styrofoam resin about 15 cm high, a capacitor was placed on top of it, and the weight was measured before and after charging. Within the range I observed, charging the capacitor did not result in any weight change within the 0.1g measurement accuracy range. In other words, it neither became lighter nor heavier.
Even with a homemade parallel plate capacitor, there was no change in weight within the range where discharge did not occur. Experimentally, it is important to note that when a high voltage is applied, the deflection of the leads connected to the capacitor changes due to the Coulomb force. This has sometimes resulted in small positive or negative weight changes, but these are not changes in the weight of the capacitor itself.
Literature:
[2.1]PALaviolette: Secret of Antigravity Propulsion. pp.88-89.
[2.2]Waseda University Article: lifter
[2.3]Wikipedia: AEON Craft 3. Weight change due to Tesla coil action Under preparation
4. The Hutchison effect, which arose from Tesla's research on longitudinal electromagnetic waves
There are theories that this matter is true and false. I'll introduce it for now, but I'll leave that to the reader's judgment. Even if it's false, I hope the development hints are, if any. To the best of my knowledge, there are no academic papers to be found. These are primarily videos, TV programs, and related articles. It's not an academic subject.
Fig.1 Hutchison
Solis (Mark A. Solis) states (1999): This is because John Hutchison (Canadian)
Tesla's Longitudinal Waves
While conducting research on, I discovered various phenomena by chance Hutchison effect It is called. Typically, when radio waves are interfered with using a single Bandegraf high-pressure generator and two or more Tesla coils, the Hutchison effect is generated in the interference space.
Cleveland (Lance Cleveland) describes the discovery at the time: During the experiment with several high-voltage devices in place, something struck him on the shoulder. It turned out to be a piece of metal. So I put it back where it would have been originally. Then it hit him on the shoulder again. This is where the Hutchison effect was discovered. A piece of metal also appeared, floating up and hitting the ceiling.
The Hutchison effect is a multispecies phenomenon that includes the levitation of heavy objects, the fusion of heterogeneous objects such as wood and metal (see Philadelphia Experiment), anomalous heating of metals, metal failure, and changes in crystal structure and properties. This phenomenon is captured on numerous films and videotapes and has been witnessed many times by renowned and reliable scientists and engineers.
In the Hutchison effect, when metal is heated, an abnormal localized heating phenomenon occurs in which the surrounding material (mostly wood) is not burned or scorched. This shows that humanity still does not fully understand heat. Thermodynamics today, including electromagnetism, is still incomplete. It also reminds us that this abnormal heating phenomenon is a spontaneous combustion of the human body, meaning that even if the human body is overheated, very little of the surrounding material burns.
The levitation of heavy objects is not simply electrostatic or electromagnetic levitation. Those attempting this should note that the equipment is limited to devices that use 75W of power from an AC120V output, similar to the one Hutchison used to lift a 60-pound shell.
Hutchison tried to collaborate with other researchers, but was dismissed as an unusual study and did not treat it seriously. However, Books published in Japan [4.1] covered Hutchison's life and research and sold well. It was also featured on Nippon Television. In Japan, which is largely blessed with natural resources, this idea was seriously perceived as a new energy source.
As a result, Hutchison was asked to give a lecture in Japan. Thousands of Japanese people were expected to take part in his speaking tour. This is Hiroshi Yamabe It was planned by Mr. He made his fortune in advanced engineering fields such as artificial intelligence and Robotex, and is a well-known Tesla commentator and speaker. Yamabe offered to build a research institute for Hutchison in Japan. However, the Canadian was hesitant to travel to Japan. Hutchison was still undecided about what to do. I wanted to create something that would go beyond the previous Hutchison effect.[ 4.2]
G. Dr. Hathaway (Dr. George Hathaway) explains how the Hutchison effect alters the properties of various metals, causing them to gel (Figs.2-3). This is part of Hathaway's overview of the 1980s VHS of the Hutchison Effect.
From the beginning of his research, Dr. Hathaway participated in extensive research and filming of the Hutchison effect as a research partner of Hutchison. In the video, he describes a number of interesting samples he participated in the experiment.
The Hutchison effect involves many strange phenomena, the most significant of which is the change in matter caused by the various resonant fields that occur in the Hutchison effect. Metals, aluminum, brass, and other metals literally turn into jelly-like substances, often mixing with substances like plastic and wood (one example is in Fig. 2), and when the resonant field is turned off, they harden again, but their molecular structure has changed.
At room temperature, the phenomenon of metals turning into jelly and changing their crystalline structure and properties is reminiscent of Uri Geller's Spun bending. Solis says it will affect van der Waals power. This matter needs more research.
A subsequent study by Hathaway added more data. The first of these is that the Hutchison effect on a substance usually begins at the center of the substance and progresses towards both ends. Second, impurities in all metal samples work through the molecular structure of the gelled metal and are pushed towards both ends of the sample. This is where the impurity density increases.
Fig.2 Fusion using the Hutchison effect [4.6]
Physicist Ken Shoulders, a highly regarded scholar in both theory and experiment, has successfully performed experiments to reproduce the anomalous local heating phenomenon of the Hutchison effect. This often involves the natural destruction of metals. Ken Shoulders has succeeded in proposing a clear theoretical explanation for these effects, and is currently researching whether he can be completely certain of it.
There are many videos of the Hutchison effect. For example, [4.6][4.7]. This is where phenomena such as objects surfacing are captured. In Japanese books, for example, there are references [4.1] and [4.8].
(Truth theory)
According to Peswiki [4.3]:
Some of the Hutchison effect was recorded by a research group that included several people from SNL (Sandia National Labs). It was founded with funds from John Alexander. Research into the Hutchison effect was also conducted by SRI (Stanford Research Institute) and CIA (Central Intelligence Agency). It was in the 1980s. The research group concluded that the Hutchison effect is true, but cannot be explained by ordinary physics.
Furthermore, as mentioned above, physicist Ken Shoulders has successfully performed experiments to reproduce the anomalous local heating phenomenon of the Hutchison effect. This, and independently, is also confirmed by scientist Richard Hull.
(false theory)
According to Hutchison hoax [4.4]:
Some of what Hutchison calls strange can be explained by electromagnetism and well-known physics. Yet he gives mysterious explanations such as zero-point energy and electromagnetic fields that cancel out gravity. Unfortunately, he is the only one who can create that effect, and even he has not been able to replicate it. At least not in front of an unbiased observer. His evidence is mainly videos and his words.
Skeptics speculate that Hutchison has an electromagnet mounted on the ceiling, hiding metal inside the object and drawing it into it. He also says it's possible to switch off an electromagnet and take pictures of falling objects with the camera upside down to make them appear to be floating.
Fig.5 Hutchison (Apartment Laboratory)
(Sale of Hutchison Equipment)
Hutchison had recently sold his anti-gravity lab at auction on eBay, an online mail-order store. 2010. This refers to July 27th. The two German groups won the bid. Hutchison said he plans to go to Germany to set up the lab. Why did they want it? I don't know that. The technology is old and was used at Lockheed Martin and Los Alamos Sandia Labs. Sandeia has much more advanced antimatter and anti-gravity technology than this. I have other adventures. Change is good for your health. Those who want to know the inventory of the equipment sold "The device I sold off" Please click here.
(Hutchison's Recent Research 1) Radioactive neutralization of radioactive waste
(1) From Gary Vesperman's account:
Gary Vesperman on the radioactive neutralization of Hutchison's radioactive waste
“House of Clean Energy Inventions” In this regard, it is stated as follows: However, Hutchison has not released the details of the technology, so we don't know for sure whether it's true or not.
"John Hutchison used a specially designed Hutchison-Lazarian frequency generator (pictured below) “Hutchison effect” They claim that this can be used to neutralize the radioactivity of radioactive waste and to eliminate excess radioactivity over an area of several square miles, possibly within a 75-mile radius.
Fig.6
In a YouTube video, he demonstrates the conversion of his “radiation gun” alpha source."
(Translation note: This video is probably Transmutation of Alpha Emitter - HUTCHISON EFFECT This seems to be the case, but it is not certain.)
The above story is far too messy. There is no description of the photos of the device, and its origin is unclear. It is unclear whether the above photo shows only a small part of the device. The information below, although more detailed, is fragmented and, again, will be very difficult to grasp.
(2) From Pure Energy Systems.com:
The following is: “Hutchison gives instructions to protect the Earth from radiation fallout from Japan” Pure Energy Systems.com titled News
This is a general translation. This is a strange story, but I'll just share it as some recent information about Hutchison.
Sterling D. of Pure Energy Systems. Preface by Alan:
I would like to use the following E-mail: John Hutchison and Nancy Lazarian Received from. Clearly, they believe that a circuit network consisting of radio hams, CB radios, and Tesla coils could form a barrier to protect against radiation emitted from nuclear reactor accidents, not only in the United States but globally, and even in Japan.
E-mail describes a relatively simple method. This is far beyond my area of expertise, but Hutchison has the achievement of being able to perfect some very unique effect of frequency. We have published his paper on the use of radio and odeio frequencies to clean up most areas of water in polluted bays to their initial state.
Fig.7
Fig.8
What is CB radio
CB radio generally refers to a system or a wireless communication system based on that system for short-range voice communication that can be used and realized at low cost for contact made by individuals for personal business or for contact made by individual businesses, small businesses, etc. for their business.
CB radios are institutionalized in many countries around the world, and in general, the operation of a CB radio system can begin after purchasing a radio, through a simple procedure, or without any procedures. Frequency bands used: 26-27MHz and 400MHz Many use it. CB radio using the 26-27MHz band "Citizens Band Radio Service" There are many systems that use frequency arrays of. ( Quoted from Wikipedia)
Ham radio, CB radio, or Tesla coil, etc. To all those involved
If you don't have one of these, get some rebar (REBAR) and put it in your garden.
To media representatives. Please spread this information.
John Hutchison traveled to the Gulf of Mexico to reset contaminated water using certain Odeio and radio frequencies. This science can be used in attempts to protect the Earth from radiation emitted in Japan.
Hutchison can be sent right away. People need to pick up that signal and make it “reflect” to create protection.
Hutchison's explanation is as follows:
To Ham Radio Users
Tuning to ULF band at 16kHz, VLF band at 19kHz-400kHz.
Then tune to the HF band at 4MHz. Start at 2MHz, go up to 18MHz, then go up to 27MHz. There will be many side carriers.
Reference video has something very similar to this (Note: This site is currently closed)
The RF effect is also present in the X-band region.
Solar flux index and hydrogen band regions,
These are broadband bands of 21-24cm.
Capture these. And use AM, USB and low SB to set up the relay for retransmission.
The frequency is RF-modulated laser and Tesla coil But I can receive it.
Tesla coils can do a lot on their own. If you connect a power source, it will receive and transmit.
And if you have an impulse generator or an RF generator, put a signal in it and fire it.
To Ham Radio Users
Use phase shift. And use other devices to get the frequency.
To CB radio users
If you can pick up a frequency from John Hutchison, please retransmit it. Please use CB SKIP.
We deal with the interaction and propagation of over-the-air waves, terrestrial waves, and larger and more important working bodies (such as the ion layer, the Sun, and the geomagnetic field). This is safe.
Psychotronics
(Quoted from Wikipedia) Psychotronics (also known as mental engineering) is a concept that was initiated in the Communist world as part of PSI research (parapsychology/psychology research) that involves the use of electromagnetic waves to artificially alter psychology.
Anyone else
We used a rebar (REBAR) as an antenna to receive RF frequencies.
This had an above-ground cleaning effect around the rebar.
Get some rebar and lay it on the ground.
Along these lines, use your mind to heal the Earth and help Japan.
This is called psychotronics.
All of the above information and psychotronics is a science that has been embraced by the military industry and noetic science teams.
Please join us.
Please save the planet.
John Hutchison and Nancy Lazarian
Q&A
Reinforcing bars
Question: Do you use rebar to capture RF frequencies. How long is it and how long do you bury it in the ground. What is the diameter. How many rebars do you use. If you use four, do you turn them in each direction.
Answer: March 19, 2011 2:32 PM MST
Length: 6 feet
Bury about 1 foot underground
Diameter: 1/4 inch to 1/2 inch. Or whatever you can get.
One is fine. Four is even better.
Fig.9 John and Nancy, photo by Walter (YouTube producer) (November 17, 2010). Later, they eloped and got married on January 29, 2011.
(Translation note: If you search the web for the above psychotronics, you will find several results. It's a good reference if needed. ---It's outside my area of expertise and I have no idea about it.)
(Hutchison's Recent Research 2) Water flotation
This is Hutchison floating a toy ship
Philadelphia Experiment It happened when I was doing Water flotation phenomenon
That is. The Philadelphia Experiment (Philadelphia Experiment) was a stealth experiment (officially known as the Rainbow Project『) conducted by the United States Navy off the coast of Philadelphia, Pennsylvania, and is usually said to be one of the urban legends.
Fig.10 Levitation of water (occurred during the Philadelphia Experiment)
Fig.11 Levitation of water (occurred during the Philadelphia Experiment)
Fig.12 Levitation of water (occurred during the Philadelphia Experiment)
Fig.13 Levitation of water (occurred during the Philadelphia Experiment)
Fig.14 Levitation of water (occurred during the Philadelphia Experiment)
Fig.15 Overall water foaming phenomenon that occurred during the replication of the Philadelphia experiment.
Wolter: The water started to float.
Hutchison: Uh.
Wolter: I see. What did it look like?
Hutchison: Oh, it was really wonderful. Waves began to take shape on top of it - in a container with a surface area of about three square feet - with a toy warship about a foot long floating in it - this was a Philadelphia experiment for another TV show.
Wolter: Oh, right, you were trying to recreate the Philadelphia experiment with a toy ship when the water levitation happened.
Hutchison: Yes, water, it's just bubbling all over. Then it formed into tiny droplets and rose from the container.
Wolter: Did the droplets rise.
Hutchison: Yes.
Wolter: I watched the video and didn't see any droplets.
Hutchison: OK, here's a picture. - I was doing a history show called “Earth's Black Holes”. The photo director was John Arler, but he was taking all the photos. But what disappointed me was that he didn't include it in the TV show that aired “Earth's Black Holes”.
(Impressions)
Hutchison's main point is to create a space where longitudinal waves interfere. It will be interesting to see what phenomena can be observed in such experiments.
According to Bearden, I don't know John Hutchison very well, but I've met him a few times at various conferences. I almost participated in a project related to his research once, but I canceled it. Unfortunately, they lacked the scientific horsepower to reach, in my opinion, the true physical mechanisms. That's not zero-point energy. John is the last hippie of true free spirit. He's a good man. That's what they say.
When one receives a university education, one tends to become obedient to the teachings and lose one's free spirit. I hope you will study with the free spirit of Hutchison and publish your findings in an English-language academic journal. If you are an inpatient, you will learn how to write an academic paper and will be familiar with all the experimental methods, data processing, etc., so I hope you will do so. I believe this will promote development in this field and eventually lead to the resolution of energy problems.
At Lockheed Martin and Los Alamos Sandia Labs, Hutchison has revealed that they possess antimatter and anti-gravity technologies that are far more advanced than the Hutchison effect. If this is true, then Japanese technology may be lagging behind. Why the Japanese didn't participate in Hutchison's auction. Hutchison came to the winning bidder and set the device to work properly, so Winning bid price That wouldn't be such an expensive purchase for a company. The information obtained through experiments with that device should represent a significant technological innovation step.
As I've said before, retrials aren't boring. During the retesting process, you will also be blessed with the good fortune of a by-product: new discoveries. Once we can confirm the so-called Hutchison effect that Hutchison claims, I think we should proceed with applied development research along with that.
The potential applications are best explored by letting your dreams flourish. For example, New cold working This is a possibility. It may become easier to process types of things that were previously difficult. A car that rises about 1m and runs That might also be a possibility. It could also be Haba－ Bode or Kuruma, who appeared in Spielberg's sci-fi films. Or imagine that the car will be lighter even if it doesn't float. Imagination leads to creation.
In my opinion, this experiment could have a major impact on the body, so it could be dangerous if you don't move it more carefully and with enough shielding. Please avoid doing this in a residential area or in your own study. Because there has to be an impact on the neighborhood. I don't know how to shield it. ( Disclaimer) Any risks are at your own risk. The damage caused by this experiment is not my responsibility.
Literature:
[4.1] I believe that the book published in Japan referred to here is "The Amazing Hutchison Effect" (Tama Publishing, 1993).
[4.2] http://www.rexresearch.com/hutchisn/hutchisn.htm
[4.3]http://peswiki.com/index.php/PowerPedia:Hutchison_Effect
[4.4]Hutchison hoax: http://www.skepdic.com/hutchisonhoax.html
[4.5]The Hutchison Effect: George Hathaway on Metal Jellification;
[4.6] Metal Fusion Hutchison Effect;
[4.7] The Hutchison Effect-John Hutchison:
[4.8] Unknown Energy Field (Tama Publishing) 1992. 5. Levitation of a Kowski-Frost Cooling Interferometric Crystal Resonator
First,
Crystal resonator However, he mentioned the possibility of capturing etheric energy to generate electricity
The Committee recommends that the State party take all necessary measures to ensure that all children are provided with adequate and adequate housing, adequate housing, adequate housing, adequate housing, adequate housing, and adequate housing. Here we will introduce that a crystal resonator is levitated by interference waves. This article was published in the reliable German journal Radio Umschau. This was further published in the issue of Science and Invention in 1927. The study was conducted in 1919. The main points are described below.
In the course of their research into USW waves (ultra-high frequency waves, 300 MHz-3 GHz), two young European researchers made a discovery that promises fundamental importance to the scientific community. The discovery was made about six weeks ago by Dr. Kawski and Engineer Frost at the newly established central laboratory of Nessartsadding-Werke in Darredein, Poland.
While experimenting with a crystal resonator, the crystal suddenly and clearly changed its profile. When it was maintaining a certain temperature not exceeding 10℃, a milk-colored haze appeared in the center of the crystal, gradually spreading and becoming completely opaque.
They continued the experiment diligently for a week, and the explanation became clear, suggesting that they may not have had high hopes for the technical uses of their discovery. The basic point must be made before the explanation is that, at least to some extent, crystals of quartz and other similar atomic structures, when compressed or expanded, undergo potential excitation in that direction, and when repeated at high speed, the electrical waves turn into mechanical vibrations. This is the so-called piezoelectric vibration.
Although the piezoelectric vibrations of the crystal are very small, they are used to keep the frequency of radio broadcasts constant. Here, apart from that, if the excitation of the crystal in various directions is specially arranged, the extension or increased length will not return to its original shape.
Fig.5.1 Photo of a gravity-free device. Crystal gives 55 pounds of weight It looks like it's supporting. Dr. Kowski wears a top coat However, this is due to the low temperature of the laboratory.
Electron dispersion occurs from the molecule, which is irreversible and alters the overall structure of the crystal, making the initial state unrecoverable. When it becomes stretched, it loses its transparency, which can only be attributed to the mysterious properties of crystal. At the same time, a change in gravity occurred. When the experiment was carried out on a balance, a high voltage current was passed through the crystal, causing the arm of the balance on which the crystal was resting to rise. Fig.5.3 shows the experiment at this time.
This led us to research to see to what extent the weight would decrease. They used more power, but eventually increased it to a few kW. The irradiation time was also made much longer. As a result, 5×2×1.5mm 3 The small crystals gradually grew larger, eventually reaching a size of about 10 cm on each side (Fig.5.4).
Fig.5.4 Relative crystal sizes before and after the experiment A diagram showing. Every side is roughly 20 times larger. The initial size is shown in the bottom left corner.
The crystal, which had large dimensions, was very light, and with a weight of 25 kg lowered, it floated in the air, along with the crystal itself and all the devices. Using a highly accurate scale from the Darredein laboratory, the exact measurement was made, and when calculated, the weight was essentially negative.
It should be noted that the law of conservation of energy has not changed at all. The energy used to handle the crystals is the opposite of gravity. The mystery of gravity is still unsolved. The experiment is further in progress.
However, for the first time, gravity experiments were possible, even though they were far away and outside the scope of research. And after a long search for a clear understanding of the relationship between electricity, magnetism, and gravity, it seems we have found a way.
(Impressions)
As shown in Fig. 5.2, Kawski-Frost applies high frequencies to electrodes AB and CD. In this way, two fields are stacked and interfered with. Maybe AB alone didn't cause the phenomenon. Meanwhile, Hutchison uses Tesla coils and Bandegraaf devices to generate interference waves Deformation or levitation of metals is doing the following. Kawski-Frost uses some kind of high-frequency generator to generate interference waves to deform and lift the crystal. Both suggest that interference waves are key.
水晶は、とくに不純物、色中心、電気的性質などなどについていままで非常によく研究されてきたし、おびただしい数の学術論文が蓄積されている。しかし、カウスキー・フロストのような研究は他に例をみない。追試しようにも、水晶の種類を不純物の種類・濃度・格子欠陥まで含めて特定し、探し出すのがまず第１の困難であろう。右水晶か左水晶かも不明である。カットの結晶軸方向が不明である。それから周波数と振動モードが不明である。このようなわけで、追試はむずかしい。
そうはいっても、黙って手をこまねいているわけにはいかない。入手できる水晶を使って、実験をはじめるのがよいと思う。Fig.5.4に示すような角形水晶では、とても興味深い振動モードがいくつか現われる。このときレーザードップラー変位計があれば可視化できて都合がよいが無ければ無いで工夫したらよい。この点に着目して、徐々に調べていけばよいだろう。
白濁・膨張した水晶には、もはや圧電性はないかもしれない。そのような水晶ができたときは調べてみればよい。それは可能でなくても、これらのことは、スポンジ状の石英（信越石英？という名前の会社から販売されていた。）を使って、干渉波を印加すれば、重量変化が見られる可能性を示唆している。この石英はスポンジ状といっても目が超緻密で穴は顕微鏡でなければ見えないものである。なお、次節の昆虫の微細な空洞構造も参照してみるとよいだろう。
応用面を考えて開発する。これはハチソン効果のところで述べたこととほとんど同じであるが、夢をふくらませてとりくむのがよい。1mくらい浮上して走る車の可能性もあるかもしれない。あるいは浮かなくても車体重量が軽くなるとか、いろいろ想像するとよい。
ところで、水晶共振器からは、強い縦波電磁波が出ていることをご存知だろうか。そんなことは知らなくてもよく、そう仮定すれば設計しやすくなるし実験もしやすくなるでしょう。
6. V. Grebenikov: Anti-gravity flight due to insect cavity structure effect
6.1 Entomologist's Accidental Discovery: Cavity Structure Effect
Grebenikov
(Russia) [6.1] (Fig.6.1) described himself as a scientist, naturalist, entomologist, painter, and specialist with an interest in a wide range of fields. For many people and scientists in Russia, he Cavity structural effect (CSE) He is known for claiming to have discovered
In 1988, he discovered the anti-gravity effect of a certain insect. But what impressed me most was the accompanying phenomenon: when an object enters a zone where gravity cancels out, it becomes completely or partially invisible or distorted.
Based on this discovery. A bioengineered design was created to create a single-seater anti-gravity platform (floating air platform, Fig. 6.2) that could fly at high speeds. Since 1991-92, the device has been used many times for high-speed travel. He died at the age of 74 (2001) and took his manufacturing techniques to the afterlife. The average life expectancy for a Russian man is 63 years, so 74 years was a long life expectancy in Russia.
He left behind illustrated notes that he had drawn himself. That is, "My World" (My World) It was self-published (1997) under the title: Among them were not only flying experiences but also observations of insect nests and unusual phenomena involving insect body parts. After his death, the summary
English Published in [6.2]. AV Frolov, (General Director of
“Edited by Faraday Lab Ltd” company). This will be written below.
Let me write a little about the circumstances. In the summer of 1998, Grebenikov Beetle elytra I investigated the microstructure beneath the surface of (Shoshi:wing case) and became interested in the multidimensional structure of a solid (Figs.6.3-6.4), which was periodic, incredibly unordered, and had no specificities, in a way that would not normally be considered. It felt like it had been pressed on a complex automatic press.
I had never seen anything like this except for this insect. It did not exist in other natural environments or in anything made using artificial technology. Studying this amazing fine pattern, he Gravitate Plane (gravity aircraft) He would design a new kind of airplane, which he would call.
As is often the case, this discovery was made by chance. Grebenikov attempted to take chitin, which grows densely from the elytra of several beetles under a microscope, and then place it on top of another chitin. Then, he slipped through the tweezers, floated in the air, and remained suspended. So he tied some flakes vertically at the ends with a string to form a single block. I put it on my desk. I tried to place thumbtacks on the block, but it was impossible. For this reason, the thumbtacks would jump up, be flicked off, and fly away. I forcibly secured the thumbtacks to the chitinous structure, and the next moment they floated, they disappeared from view.
Insects with this anti-gravity structure were found to exist in only one species in Siberia.
Fig.6.3 These strange, more subtle, and complex devices of insects are tactile,
It is not used solely for smell, sight, or sound sensation, but also for receiving electronic waves or
Some of these are used to block Earth's gravity.
This is an electron micrograph.
Fig.6.4
Multi-cell structure of insects. This is an electron micrograph with a magnification of several hundred to several thousand times.
Recently, it has been discovered that the elytra of many beetles float, and this phenomenon has become visible on YouTube. Some of the Grebennikov_YouTube_sites are listed below: However, there is no guarantee that the beetles used here are the same as those used by Grevenikov. He doesn't know because he never uttered the name of the beetle.
Viktor Grebennikov #1 - Testing Scarab (June Bug) Wing Covers Kogane Mushrooms
New Information on Viktor Grebbenikov - Possible Vindication The elytra float well.
Viktor Grebbenikov's flying platform, Cavernous Structure Effect Cavity structure effect, gravity plane, koganemushi experiment, etc.
Hovering Elytra - Grebennikov Video Replication Series Elytra float
Grebennikov Technology - Basics 2 - Part 3 鞘翅が約4cm浮揚しその高さを維持。しかし、この場合は、見えない糸でつっているような疑念が残る。yuoutubeによくある捏造。
Fig.6.5 鞘翅が約4cm浮揚している状態（出典：上記5）.
この場合は、見えない糸でつっているような疑念がある。yuoutubeによくある捏造。
After discovering biological antigravity in 1988, Grebenikov continued his research from various perspectives for the next three years, designing the platform and conducting experiments on it. And V. Together with Professor Zolotarev, we applied for a patent.
In 1991, he built the Gravitate Plane (gravity aircraft) and began flying with this noise-free aircraft. Its speed reached 1,500 － 2,400 km/hour. Because this lacked inertia, the pilot did not feel any speed. Even when flying, it was barely visible from underneath. Instead, those who saw from the ground saw spheres or disks of light, or sharply fringed clouds (remember, by the way, that placing thumbtacks on chitinous blocks, as mentioned above, obscured the thumbtacks).
Needless to say, this was not discovered yesterday or today. It was the 1980s. Grebenikov attempted to awaken the ”true” scientist. But it was useless. No one wanted to talk to him.
He died of a stroke in April 2001. My World, which he wrote in 1997, remains. This full text ishttp://bronzovka.ru/oglav.htmlから入手できる（ロシア語）。英文で出回っているもの[6.2]は、その一部だけである。
6.2 Why it was lost. Detailed technical information & gravity plane (gravity plane)
Fig.6.6 Grebenikov [6.2]
In 1992, Grebenikov's book was published in the newspaper “Molodost Sibiri” “My world” A pre-release of this has been posted. At this time, the first photograph was published showing Grebenikov flying on a platform. This photo was also published in the magazine “Tehnika molodezhi”.
Unfortunately, the manuscript was likely to be 500 pages long and included 400 color photographs. The principles of the airplane, its height, and its complete equipment were written. Grebenikov was trying to fully describe the invention.“ That was my intention with My world”. However, the proofreader and editor (presumably by order of their supervisor) explained that they were not permitted to publish such information.
Therefore, Grebenikov had to delete and rewrite it. This is why it remains a great source of tips and keys in this book. If they were going to completely erase information about the platform, they would have had to rewrite it all.
Two photographs of Grebenikov flying were left in the book. Because people already know about it. As a result, the book was just over 300 pages long and had a photo of an inappropriate butterfly at the end of chapter 5.
Although Grebenikov was unable to describe the invention, he did try to convey the basics of the invention to the reader by writing some hints. Incidentally, in the 1990s, they tried to talk about this invention to the world, but in the 2000s, after they got sick, they started to reduce the amount of information they received, believing it to be dangerous for people's health. They no longer named the insects they used, partly because they wanted to protect themselves from overfishing, which is necessary for large quantities of airplanes. His gravity plane was also shattered into pieces.
“In an article in Tehnika molodezhi” magazine, Grebenikov wrote that he had put the platform on display at the museum of the Siberian Institute of Agriculture and Agricultural Chemistry for everyone to see. A large color photograph of the platform was probably taken at the museum. If that were the case, there would have been witnesses to this plane. There must be a lot of them.
A complete working replica was built, but it disappeared after Grebenikov's death. However, the aforementioned museum still contains a model of the device created by Grebenikov. In reality, only the control stick remained. The board was stolen. The control stick had been roughly pulled out. Gibbs plaster, feathers, nuts, etc. were all broken. It looks like he twisted the control stick.
Everything on this model (switch buttons, toggle switches, right-hand handlebar) was made of clay, plaster, papier-mâché and painted silver. However, the plaster replicas were made from real board.
It's unfortunate that the bottom of the platform, the board, was lost. That is Blockboard Replication of parts and Blind control It may have included something that reflected the secret of If we were able to see the secret of control, we could have thought through the principles of how to create anti-gravity and come up with many versions.
Therefore, sections 6.3-6.5 below are bound to be subject to speculation.
6.3 Gravity plane (control stick)
The arm of the control stick of gravity airplane No. 1 is T-shaped, like Fig. 6.7, and is interwoven with numerous buttons, signal indicators (LEDs), and toggle switches. There is an altimeter in the middle. The toggle switch (5) on-off the operation of the board's electrical device (ELD) and possibly the motor device. To the left of the altimeter and opposite the toggle switch is an electric starter (3).
Fig.6.7 Arm of the control stick of Unit 1
Grebenikov pushed the starter just before the plane took off, while it was still on the ground. This allows the capacitor inside the motor to charge quickly. On the left side of the handle is another LED (1), which is green. This indicates the charge state of the motor device, and possibly its charge level, with differences in lighting.
On the other side, to the right of the handle, there are two LEDs attached. ( 8) is red and (7) is white. These are directly connected to plugs and sockets in the mechanical unit for joining and separating the blinds (Section 6.4) and varying the tilt angle. White LEDs induce a straight-line motion, whereas red LEDs induce a rapid slowdown.
The left rotary handle (2) increases the active surface area of the blinds to control blind separation (vertical traction). The right (6) controls the angle of rotation of the blind board about its longitudinal axis (horizontal traction). The two mechanical catcher buttons (14) (9) are located near the pilot's abdomen, slightly lower than the toggle switch and starter button. These are connected to a rotary arm using a push-and-turn (push-and-turn) mechanism.
To rotate the arm, press this button with your thumb to rotate it. When you stop pressing the button, the arm will lock in place at that angle. This is convenient for maintaining hovering mode or for fixing altitude and speed for extended periods. Other convex parts are pot screws. There are no other control or measurement components listed above.
Most interestingly, the right handle rotates like a regular motorcycle, controlling the plane's turns (the non-synchronicity of a symmetrical blockboard). The rotational force of the handle is transmitted by a flexible elastic cable (approximately 10 mm in diameter). The largest screw (13) on the control stick is located below the altimeter in the center and connects the cables. The entire control stick is connected to the platform and this rotary cable is connected to the center socket.
Fig.6.8 Lower part of the control stick of Unit 4
Grebenikov "trimmed the control stick screws, shortened it like a radio antenna, and removed it from the platform." It was folded in two by a joint." He wrote: And so I put it away in my suitcase. By the way, the handlebars could rotate. There is a tightening bracket (10) near the bolt of the rotary cable connection. Grebenikov tied himself there with a belt. The arm of Unit 2 is a standard type and there is nothing particularly interesting about it. He made many other types of things.
Now, let's consider the small box at the bottom of the control stick (Fig.6.8). Four thumbscrews (19, 24) on the top of the box secure the control stick and platform. The two lateral thumbscrews (20, 23) adjust the accuracy of the "day distributor"'s operation (blind synchronization and integration accuracy). There are two "day distributors". The one on the left was used to separate the blinds, and the one on the right was used to change the angle of the blinds. These "day distributors" were connected by cables from the rotary arms of the handlebars.
The pilot had a pedal (22) attached to his right foot. This feature is rapid deceleration and standard deceleration. Near the pedal, to the left of it, was another snap-on toggle switch. It was either bright orange, made of transparent plastic and with an internal LED, or made of opaque material and coated with fluorescent paint. Why did you apply it? This is because it was used only at night or in dimly lit conditions.
6.4 Gravity plane (base board) Half of the platform is made by Grebenikov and is a single piece of wood, while the other half is plywood made from boards glued together. However, this is a microscope box from the old Sobietto period, with an outer wall 8mm thick and an inner wall (of firing material) about 50mm thick. Grebenikov simply removed the Plasteik foam and covered it with dry oil. This is the case with Grebenikov, even though the board thickness is weak at 8mm. It was probably reinforced from the inside with a metal plate.
6.5 Blinds (Blockboard)
The blind is a standard fan made from flat, long blades. Four fans were loaded at four corners, with the fan rotation axes positioned vertically. As can be seen in the photo (Fig.6.9).
The heads of the two bolts are also visible near the top right of the photo. This is for stopping the day viewing mechanism which is transmitting the force from the day distributor to the opening device of the fan. Each fan consists of nine blades.
Fig.6.9 Photo of the bottom of the platform (My World). I can see the back of the blind fans.
To increase strength, the fan blades were made of metal plates. Each blade surface was covered with a fine mesh netting, but this did not interfere with its operation. This is because the cavity structure was not shielded. Furthermore, it protected the aircraft from mechanical influences such as grass during landing. The blade holes seen in the photo are not related to the fine cells. This was made simply to lighten the weight of the blade.
The blinds (blockboards) are the controls that allow Grebenikov's gravity plane to fly freely, but unfortunately, it is unclear what more details are available. However, editor Frolov develops his speculation about the principle of anti-gravity. There, the function of leptons is emphasized. Leptons are the same as ether and orgone, but in Japanese terms they refer to ”ki”.
Research into Tesla's cosmology, John Keeley, Henry Moray, Wilhelm Reich, and others will be important. If you want to know more, please refer to the original book [6.2].
6.6 The inexplicable mysterious phenomenon of gravity flight
Flying gravity planes become invisible from the ground. But the plane pilot can see the ground.
The pilot's body no longer feels inertia.
During flight, the camera shutter will not go off (it is unclear whether this happens all the time).
The rolls of film, both in my pocket and loaded into my camera, were photosensitive (not sure if this happens all the time).
When I looked at it after landing, the clock was out of sync (it's unclear if this happens all the time).
It's easy to fly on a sunny summer day, but difficult when it rains. Winter is almost a no-go.
Fig.6.10 Illustration of a gravity plane flying (My World).
Grebenikov left behind the illustrations shown in Fig.6.10. The aircraft and pilot are enveloped in zero gravity. The curve in the figure is the path of light. If so, the aircraft and pilot may be invisible or difficult to see from the ground.
Fig.6.11 Pilot starting flight in gravity plane (My World).
