The anti-locking braking system of an automobile is built in such a way that the electronic control unit controls the braking system. Even if in the ancient vehicles, it was recognised that the efficiency of the foot brakes should not be less than 50% and that of the handbrake should not be less than 30%. When calculated with respect to efficiency, the determined efficiency should stop the vehicle at any point when both are applied.
What is the main function of the braking system in an automobile?? Thisshould be the first question that pops into the mind of all who drives. Bringing to your notice right now that the designed function of the brakes in an automobile is to slow down or totally stop a moving vehicle by converting the mechanical energy possessed by the vehicle into heat energy by means of friction.
Know this that, the rear wheel locking is very more hazardous than the locking of the front wheels. When the brakes are being applied, the unsprung mass slows down but the sprung mass tends only to carry on in the direction in which the vehicle is moving. This effect then causes the automobile front to dip and then a larger portion of the vehicle weight is caused to act on the front axle.
Under this particular condition, a greater part of the braking effort must be applied at the front brakes. This takes good advantage of the high road adhension of the front wheels due to the weight transfer and secondly to prevent the rear wheel locking. Brakes are designed so that 60% of the braking is carried out by the front wheels.
This is a new week, as you drive out this week, always remember to use your brakes accurately and then used the recommended DOT specification for your Brake fluid. To encourage this content, try to give it your 100% upvotes and ask questions wherever necessary. Have a great day.