This tutorial works fine for those who would like to follow the steps without really thinking what is going on. Just follow the instructions and everything is going to be fine.
We will compile the binaries and apply the checkpoint fix which isn't merged on GitHub by the time this guide was published.
Lazy people can use the precompiled binaries posted on git repository but without any warranty.
Connect to the remote server via SSH using putty or from your shell.
Perform the following commands on the remote server:
sudo apt-get install update
sudo apt-get upgrade
sudo apt-get dist-upgrade
sudo apt-get install nano htop git
sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils
sudo apt-get install libboost-all-dev
Berkley 4.8:
sudo add-apt-repository ppa:bitcoin/bitcoin
sudo apt-get update
sudo apt-get install libdb4.8-dev libdb4.8++-dev
Download the compiled version from git:
cd
sudo git clone https://github.com/whywefight/DAS-12.2 DAS-Source
cd DAS-Source
sudo mkdir src
sudo cp das* ./src
Start the wallet and keep reading while it is syncing.
sudo git clone https://github.com/Truckman83/DAS-source
sudo nano ~/DAS-source/src/chainparams.cpp
Search for:
( 20282, uint256S("0x0000000000089ac18dd60904abddf2345fbe7632b94b8a243646124a656a0055")),
Replace 20282 with 16281 so it looks like:
( 16281, uint256S("0x0000000000089ac18dd60904abddf2345fbe7632b94b8a243646124a656a0055")),
Coming back to the wallet
cd DAS-Source
./autogen.sh
./configure
make
make install # optional
cd src
strip dasd # optional
strip das-cli # optional
strip das-tx # optional
Starting wallet for the initial sync:
sudo ./dasd -daemon
sudo ./das-cli getinfo # Compare the block height against the explorer
While the wallet is syncing we will switch to the local wallet.
getaccountaddress 0.masternode genkey.You will now need to navigate to your Roaming Folder, in order to do so:
sudo ./das-cli getaccountaddress 0 (we will call this address "Acc 0" from now on).
sudo ./das-cli masternode genkey
sudo ./das-cli sendtoaddress <Acc 0> 1000
sudo nano ~/.das/das.conf
rpcuser=<username you prefer>
rpcpassword=<password you prefer>
rpcport=9399
masternode=1
masternodeaddr=<your public ip>:9399
masternodeprivkey=<your key, the one you copied to the notepad >
addnode=24.244.180.55
addnode=185.137.97.24
addnode=185.137.97.15
The wallet should be synced by now. Double check it with sudo ./das-cli getblockcount.
Before going on, we will wait for 15 confirmations on the chain for the 1000 DAS transaction. This might take some time. You can check your TX on the explorer. Once it has 15 we are good to go on.
sudo ./das-cli stop (assuming you are still in ~/DAS-source/src/ )
sudo nano ~/.das/das.conf
rpcuser=<username you prefer>
rpcpassword=<password you prefer>
rpcport=9399
masternode=1
masternodeaddr=<your public ip>:9399
masternodeprivkey=<your key, the one you copied to the notepad >
addnode=24.244.180.55
addnode=185.137.97.24
addnode=185.137.97.15
sudo ./dasd -daemon.sudo ./das-cli masternode status.You should get:
{
"vin": "CTxIn(COutPoint(f98d1b1bb96caec4fee3956df907a60c05ef1c74ca9136f07707ea70e9d0b86f, 1), scriptSig=)",
"service": "195.181.243.208:9399",
"pubkey": "D5PDW272NBGBFCzguGTboxp2ABQfp6GUGx",
"status": "Masternode successfully started"
}
Job's done. You can double check if you see your node in the wallets Masternode list by looking for the Acc 0 address or Public IP.
masternode start. On the Masternode type:sudo ./das-cli masternode start`. Just in case restart the remote wallet.Follow the above guide once again. You don't have to install the dependencies again and you don't have to compile the wallet.
However, you need a new Acc 0 address and a new Masternode key. You can get them using a separate data directory. In order to get one perform the following steps:
Target needs to be in "" like "C:\das-qt.exe". Put -datadir=<WHAT/EVER/FULL/PATH/YOU/WANT/IT> at the end. Will look like: "C:\das-qt.exe" -datadir=<WHAT/EVER/FULL/PATH/YOU/WANT/IT>
sudo mkdir ~/.das2
cd ~/DAS-source/src
sudo ./dasd -datadir=~/.das2 (sometime this doesnt work, in that case use the absolute path /home/YOURUSERNAME/.das2)
sudo ./das-cli -datadir=~/.das2 stop
sudo nano ~/.das2/.das.conf
Put the following in you das.conf file:
rpcuser=<username you prefer>
rpcpassword=<password you prefer>
rpcport=9499
bind=<you send public api>:9499
masternode=1
masternodeaddr=<your public ip>:9399
masternodeprivkey=<your key, the one you copied to the notepad >
addnode=24.244.180.55
addnode=185.137.97.24
addnode=185.137.97.15
Pay attention that you have to use the different port!
Save and exit it.
sudo ./dasd -datadir=~/.das2 -config=~/.das2/.das.conf -daemon
Keep track if its sync with:
sudo ./das-cli -datadir=~/.das2 -config=~/.das2/.das.conf getinfo
Check your Masternode status with:
sudo ./das-cli -datadir=~/.das2 -config=~/.das2/.das.conf masternode status
Repeat the above steps for setting up more Masternodes. You obviously need a new data dir and conf. Daemons will be controlled by adding the data dir and conf to sudo ./dasd.
Disclaimer:
This guide was originally posted here by 
BTC: 1HVgDLFT3xx2RX9H9ZSp3WrCDJevc2CWg5
DAS: DL9LXJWckQZkghLmdeUh2NdyufsdujuceG