Hola amigos de hive ¿Cómo están Cómo les va? Soy Daniel Espero estén bien Quiero compartir con ustedes un contenido bastante interesante.
Hello friends of hive How are you doing? I'm Daniel I hope you are well I want to share with you a very interesting content.
La última vez que le cambia el aceite de la moto me agarró en un sitio donde no estaba previsto cambiar el aceite, fue que simplemente me di cuenta de que no tenía aceite por un sonido de la moto, estaba en pleno rodaje, lejos de casa y no cargaba embudo ni destornilladores para realizar este trabajo.
The last time I changed the oil of the bike caught me in a place where it was not planned to change the oil, it was that I simply realized that I had no oil by a sound of the bike, was in full break-in, away from home and did not carry funnel or screwdrivers to perform this work.
Cómo el aceite dela moto se había consumido no era necesario sacarle el que tenía sino simplemente colocarle uno nuevo Así que procede hacerlo.
As the bike's oil had been consumed, it was not necessary to take out the oil it had, but simply to put in a new one, so it was done.
What do you need to have?
Debes tener el aceite y un embudo Yo no necesite un embudo, conseguí un envase de lata el cual abrí y utilice como forma de conducto para vaciar el aceite.
You must have the oil and a funnel. I didn't need a funnel, I got a tin can which I opened and used as a conduit to empty the oil.
Process
To measure the oil the first thing you have to do is to wait until the morning or a time where you have moved it in 5 hours, this so that the oil to be at rest and you can measure exactly how much oil it has.
After that we have to remove the oil measuring spatula, clean it completely with a rag or paper, something that allows you to remove the oil residues and then insert it again.
Then you must place the bike in the right position, not resting on any leg or on any donkey, this to show you exactly how much oil is left.
In my case I had a little less than half, my bike needs a liter and a half of oil, so I had to put about a liter of oil. It doesn't matter if I exceeded it, it is much better.
After measuring the oil I had to improvise with an aluminum can to open it and make a kind of conduit and then open the Speed oil that I bought and let it fall on the conduit to get right into the crevice where all the oil entered the engine, about 3 minutes in this process.
Después de esto lo único que hay que hacer es vaciar todo el aceite y tenemos un aceite nuevo.
After this all you have to do is drain all the oil and you have new oil.
Es muy fácil realizar esta acción, ya que la hendidura donde entra el aceite Está al lado de la palanca donde encendemos la moto con el pie y queda muy fácil de hacer este proceso Muchas gracias por ver el video.
It is very easy to perform this action, since the indentation where the oil enters is next to the lever where we turn on the bike with the foot and it is very easy to do this process Thank you very much for watching the video.
Ganar algunos pequeños tokens por buscar en google. Registrare aqui
▶️ 3Speak
