Good morning fam , trust your day is going well? And happy Sunday
Today I will show you the illustration on how I made this straight wrapper gown.
Materials needed to make this outfit are: My Ankara, lining,zip, oganza, chalk, scissor, tape and my breast part.
I started by cutting the down part of, which I fold the material by two measure out my length waist and hips and cut it out, and place it on the other part and I give out two inches allowance for the zip and the slitting at the back.
Now to the upper part, I started with the back side.
Which the length is by sixteen inches, the hand pit by eight inches, the neck length by seven inches and the wideness by five inches, then I divided it by two, that's from the top to the middle is four inches that's the burst point then the up and the down is by three point five inches.
And the front part which I'll be putting the Brest part.
I folded the material by two removing six inches from the top, reason because I will be attaching a material up there.
Then I folded another material and place the first one on the other one and cut the side.
I cut out my hand , and also the material for the wrapper.
After cutting all,I also cut out the lining for each part that is needed.
Then I proceeded to fixing the lining, after fixing then I iron it.
This is the back, the down part.
The upper side of the back.
The front part, down part.
Upper part of the breast part.
The oganza for the upper part.
The wrapper after fixing the oganza and lining.
After that I joined the both part together, both front and back,
After everything I proceed to join everything together fix th hand
Here is the outfit on her.
Thank you for checking on my post.