Hi, recently i build some RIGS with the Flexdesing Cases, if you are also interested in Cases from Flexdesign, you can order them here: flexdesign.lv/en/products/datortehnika/
The Goal was to reduce the Build time and have a more solid Product and less Problems afterwards.
First step populating the Power Supply, in this Case a LC 1650 Watt Mining Power Supply, pretty cheap and nice, but hard to get.
After that next Step was to mount the Mainboard, RAM and CPU in this Case a MSI, Mainboard, i dont like them, will not order them again.
Next Step was to arrange the Cable a bit and mount the Riser (V008) The new Riser V009 do not fit in this Case!
Next step is the one i like the most, mounting the GPU, which is fun with this Case since they fit 100% into the Riser and the Mounting Rail, very precise and neat.
As you can see, this first Build was my "Ghetto" Rig, with a lot of Diffrent Cards, it ends up wit 3 1080TI , 2 1080 and 1 1060. I have also a "Clean" Picture from his Big Brother with 6 1080TI.
last but very important Step is mounting the DELTA Fans, since this baby will produce a LOT of Heat. for this Build 3 Delta High Speed fans in Front of the GPU pushing fresh air thru the Case is enough to get the GPU cooled enough.
Btw. i stopped using SATA SSD, currently i run my Rigs with SMOS on a USB Key.
