https://github.com/holgern/beem
beem is a python library and command line tool for HIVE. The current version is 0.24.4.
There is also a discord channel for beem: https://discord.gg/4HM592V
The newest beem version can be installed by:
pip install -U beem
Check that you are using hive nodes. The following command
beempy updatenodes --hive
updates the nodelist and uses only hive nodes. After setting hive as default_chain, beempy updatenodes can be used.
The list of nodes can be checked with
beempy config
and
beempy currentnode
shows the currently connected node.
add get_replace_hive_by_steem() to Hive(), for transition from HF23 to HF24 on HIVE
Replace HIVE by STEEM and SBD by HBD only when Hive HF < 24
Replace steem and sbd parameter names for Hive HF >= 24 by hive and hbd
Add get follow list to Account (only for HIVE and HF >= 24)
Add BLURT, SMOKE and VIZ chain_id
Remove not used STEEM chains (STEEMZERO and STEEMAPPBASE)
Improve chain detection
rshares_to_token_backed_dollar, get_token_per_mvest, token_power_to_vests, token_power_to_token_backed_dollar
and vests_to_token_power have been added for chain independent usage
New beempy command followlist, which can be used on HIVE to receive info about follow lists
Fix beempy info on Hive
Use Hive() on beempy when default_chain is set to "hive"
Fix more Token symbols in beempy
Fix unittest and add more unit tests
Currently, STEEM and SBD are internally used to broadcasting operations on Hive which including an amount as parameter. There are also some parameter names in operations that include steem or sbd.
In the next HF 24 (ecplise), all will be renamed to HIVE/HBD and hive/hbd.
Beem does now support Hive HF23 and Hive HF24. There is a temporary function call get_replace_hive_by_steem() is is True on HF23 and False on HF24. I'm using this as test when to replacing all steem/sbd with hive/hbd.
When HF24 took place, I will remove this check and make the replacement with hive/hbd permanent.
A node running HF24 can be set with
beempy set nodes https://beta.openhive.network
A first test:
beempy transfer -a holger80 beembot 0.001 HIVE test
looks good:
{
"expiration": "2020-06-29T19:56:04",
"ref_block_num": 28926,
"ref_block_prefix": 826483934,
"operations": [
[
"transfer",
{
"from": "holger80",
"to": "beembot",
"amount": "0.001 HIVE",
"memo": "test"
}
]
],
"extensions": [],
"signatures": [
"1f427f44eee5f0abe1602854dc66175922417330bd12ba1cd4653b53a7658e5fff09d41fc49e0079ff084a0b11392cd290a5667cf95795c31f59cc92df1ea6280b"
],
"trx_id": "991b773129b0b04fe56c6b89a6ceb23971d89701"
}
Broadcasting a post was not yet possible on https://beta.openhive.network, I will investigate and fix this.
The following list shows all parameter that will be replaced:
"STEEM_" : "HIVE_",
"SBD_" : "HBD_",
"steem" : "hive",
"sbd" : "hbd",
"reblogged_on" : "reblog_on",
"sbd_interest_rate" : "hbd_interest_rate",
"percent_steem_dollars" : "percent_hbd",
"current_sbd_supply" : "current_hbd_supply",
"init_sbd_supply" : "init_hbd_supply",
"sbd_print_rate" : "hbd_print_rate",
"sbd_start_percent" : "hbd_start_percent",
"sbd_stop_percent" : "hbd_stop_percent",
"sbd_volume" : "hbd_volume",
"steem_volume" : "hbd_volume",
"steem_revision" : "hive_revision",
"sbd_exchange_rate" : "hbd_exchange_rate",
"last_sbd_exchange_update" : "last_hbd_exchange_update",
"reward_sbd_balance" : "reward_hbd_balance",
"reward_steem_balance" : "reward_hive_balance",
"reward_vesting_steem" : "reward_vesting_hive",
"savings_sbd_balance" : "savings_hbd_balance",
"savings_sbd_last_interest_payment" : "savings_hbd_last_interest_payment",
"savings_sbd_seconds" : "savings_hbd_seconds",
"savings_sbd_seconds_last_update" : "savings_hbd_seconds_last_update",
"sbd_balance" : "hbd_balance",
"sbd_last_interest_payment" : "hbd_last_interest_payment",
"sbd_seconds" : "hbd_seconds",
"sbd_seconds_last_update" : "hbd_seconds_last_update",
"pending_rewarded_vesting_steem" : "pending_rewarded_vesting_hive",
"total_reward_fund_steem" : "total_reward_fund_hive",
"total_vesting_fund_steem" : "total_vesting_fund_hive",
"percent_hive_dollars" : "percent_hbd"
I created blockchain independent function at the BlockchainInstance class, which are then implemented in Hive() and Steem().
The following functions are now available on Hive() and Steem() objects:
E.g. token_power_to_token_backed_dollar is using hp_to_hbd() on Hive and sp_to_sbd() on Steem.
It is now possible to provide account name lists as array or as comma-separated string in follow():
from beem.account import Account
acc = Account("holger80")
acc.follow("user_a,user_b")
acc.follow(["user_c","user_d"])
As the changes or not live, broadcasting a list is not yet working.
There is already a get_follow_list() which can then be used to return blacklisted, follow_blacklist muted, or follow_muted lists.
from beem.account import Account
acc = Account("holger80")
print(acc.get_follow_list("muted"))
You can find more about the upcoming api changes in this post
I improved the correct identification for other graphene blockchains. Use the Steem() class for connecting to the API node from a Graphene based blockchain.
My focus is on the usage of beem together with Hive, but I'm open to PRs that improve the usage of beem on other chains (as long as they do not impact the usage on Hive).
Example for connecting to a graphene blockchain:
from beem import Steem
blt = Steem("https://test.blurt.world/rpc")
print(blt.chain_params)
returns
{'chain_id': 'afa547e2e0adef898219d7f74abf36e6e957460a70120db21a03fed76cc0e8b6', 'min_version': '0.0.0', 'prefix': 'BLT', 'chain_assets': [{'asset': '@@000000021', 'symbol': 'BLURT', 'precision': 3, 'id': 1}, {'asset': '@@000000037', 'symbol': 'VESTS', 'precision': 6, 'id': 2}]}
If you like what I do, consider casting a vote for me as witness on Hivesigner or on PeakD