Today I was able to build up and assemble part of the stave I posted about yesterday.
I went to the hardware store and picked up some supplies. 1 1/2inch dowel's a, few clamps, glue, and some wood filler:
I then cut out all of the parts using my miter saw to get the angles from the pattern I made:
Finally I used some 1/2 inch finishing nails, some wood glue, and some clamps to assemble everything together:
Once all this drys by tomorrow I will put some wood filer over all the spaces, sand the ends/ edges out. And then hopefully get the 2 arms attached to the main stave shaft.
