Experimental lightpainting on Hive

Words
1205
Reading
6 min
Listen
Play
4y

Most of the time I'll post a shot I'm happy with here on Hive or social media. The image is usually the result of quite a few test shots where I've worked out how best to shoot something. The shots that appear in public are the ones I'm happy for people to see. What you don't see is the other 99 attempts to get something right!

This is a post of test shots. The work I've done here helps to spawn other ideas I wouldn't have had unless I tried something. And sometimes, you can only think of the idea or gain the flash of inspiration whilst you're practicing.

With lightpainting, I prefer to make it up as I go along. I will turn up to a location to shoot in the dark with the genesis of an idea but I generally see something that sparks another idea and I'll shoot off in completely the opposite direction!

Think of these shots as "R & D" as in research and development.

Bolehill Nights

Here I've used a fractal filter with concrete partition walls seperated by the filter. I like the jaunty angle and the "in your face" lighting. There's just one major flaw in this photo; there is no background seperation behind the model! I had no smoke pellets with which to create the seperation but it's an excuse to return here and re-shoot making use of those concrete walls and a fractal filter.

Bolehill-Nights5.jpg

Electric Monolith

I've been experimenting with kinetic movement in an image. The idea is that I open the shutter and let the image expose a starburst on the sensor then I move the camera and hold for another starburst.

I'm looking for a use or context within which to place this kinetic movement. I think in this image, the stripe doesn't quite fit in it's context or place in the woods. I will eventually find a use for this.

Electric-Monolith.jpg

Lighting up Roche Abbey

I've acquired a couple of small RGB LED panels, very useful for lighting up large areas. I placed two of the panels on the floor directly at the bottom of each tower and used a long exposure to light up the abbey. This shot let me know that the explosion in a paint factory approach doesn't always work and I should maybe tone it down a little! After seeing this on the back of my camera I changed the LED panels to a warmer white balance and came away with something far more pleasing.

Roche4.jpg

Condensate

As we emerged from inside an abandoned waterworks to the entrance, I noticed my 20mm lens was condensating all over the place. I managed one shot without any condensation on the lens but the conditions quickly misted my lens over again. I decided to see what would happen with this kinetic stripe with a lens full of mist.

I'm not sure it worked but it lets me know I have another option in another setting.

Condensate.jpg

In your face colour blast

This was a test shot for a kinetic stripe but the lightpainting I did in the test shot turned out way better than expected. Neil here is holding a flashlight turned off and when instructed by me to do so, he turns on the light and I pan the camera. I always tend to take a test shot first before going for the full beans!

Cadeby5-test-shot.jpg

The Scale of Fail

In a local abandoned factory is this set of industrial weighing scales. I loved the texture on the inside of what was left of the circular gauge and knew it would look quite nice lit up.

I had originally intended to tripod and lens swap in to the middle of this scale. It worked but due to not having the right lens combinations, I wasn't able to get something completely sharp for both elements.

I've included it in this post as a reminder to go back and reshoot taking pretty much all the lenses I have. Just in case!

MatlockLP3.jpg

Slipfest 22

This is an example of a test shot which informs me where I can go with the next shot. Here I used one colour and decided for the next shot to use blue wafted across the foreground which would fill in the unexposed dark parts of the frame.

Slipfest3.jpg

Windy Knoll Nights Test Shot

We arrived at this Peak District cave just as the sun was setting. I had an idea for the mouth of the cave where I could rotate a silhouette to create quite an abstract camera rotation shot. Here I was in the process of lining up the model and from this shot I deduced my centre line was too low. On the next one I re-aligned and waited for the night to fall.

Windy-Knoll-Nights9-test-shot.jpg

Drawing a blank

Sometimes you set up a shot, create the perfect lighting and then drive down a dead end. This is a fairly easy to make image where I re-positioned the lighting a few times and once happy bagged the shot. I was hoping an idea would spark from this but nothing came. I sometimes have to settle for what I get. I also have to remind myself that if something is easy to do, it doesn't mean it's not worth it or less good than the complicated stuff I do.

Also as a side note. Make sure you're model is wearing black for silhouettes!!

Loxley-LP-Alternate-Building4.jpg

Marmite Lightpainting

I got a chance to collaborate with a German lightpainter over in England who just so happened to have a LaserCube. Not believing my luck I quickly attached a fractal filter to see what would happen with a laser lit silhouette and a zoom pull. I wasn't convinced and I'm sure others will like this but it was another example of the information I glean before I move on to the next shot.

Laser-Cube-Nights.jpg

Competely messing things up

This is an example where the camera rotation didn't work well at all with a fractal filter but I do really like the "in your face" colour. For the next shot after this I nailed this much better!

Spinkhill-colour-wheel2.jpg

About me:
I usually specialise in shooting lightpainting images but occasionally dabble in urbex and artistic model photography. I'm always on the lookout for someone to collaborate with; please don't hesitate to get in touch if you'd like to create art.

Social Media
https://www.facebook.com/fastchrisuk
https://www.flickr.com/photos/fastchris/

Divider 5.png

WHAT IS LIGHTPAINTING?


Lightpainting is a photographic technique in which exposures are made by moving a hand-held light source while taking a long exposure photograph, either to illuminate a subject or to shine a point of light directly at the camera, or by moving the camera itself during exposure. Nothing is added or removed in post processing.

Single exposure Light Art Photography - no layers - no tricks - no photoshop

Divider 5.png
If you would like to see more lightpainting please give the Lightpainters United Community a follow and you will be introduced into the illuminating world of light painting!

Lightpainter United Banner.png

If you want to see more examples of lightpainting, feel free to check out these guys:

Mafu Fuma | Oddballgraphics | FadetoBlack | DAWN | Mart Barras | Stefan Stepke | Nikolay Trebukhin | Lee Todd | Stabeu Light | Maxime Pateau | Stephen Sampson | lightandlense | Neil Rushby | L.A.C.E.

WOULD YOU LIKE TO GET IN CONTACT WITH US?
Join us at Discord

Experimental lightpainting on Hive | Ecency