The Intel Xeon Silver 4114 is the second highest SKU in the Intel Xeon Scalable Silver range. With 10 cores and modest clock speeds its closest relative in the Intel Xeon E5 V4 generation would be the Intel Xeon E5-2630 V4 or perhaps the Xeon E5-2630L V4. Priced at a 40% or so premium to the Intel Xeon Silver 4110 and Xeon Silver 4112, one gets a major benefit: this is the lowest cost 10 core CPU in the Xeon Scalable lineup. With that said, it brings into sharp focus the Intel pricing deltas in the Skylake-SP generation.
Key stats for the Intel Xeon Silver 4114: 10 cores / 20 threads, 2.2GHz base and 3.0GHz turbo with 13.75MB L3 cache. The CPU features a 85W TDP. This is a price point Intel has maintained for years. Here is the ARK page with the feature set.
Here is our basic test configuration for single-socket Xeon Scalable systems:
Motherboard: Supermicro X11SPH-nCTF
CPU: Intel Xeon Silver 4114
RAM: 6x 16GB DDR4-2400 RDIMMs (Micron)
SSD: Intel DC S3710 400GB
SATADOM: Supermicro 32GB SATADOM
One of the key advantages the Intel Xeon Silver series has is the ability to use up to 12 DIMMs per socket. Intel’s embedded platforms and quad-core Intel Xeon E3-1200 V6 series platforms cannot do this in 2017. DDR4-2400 is the fastest memory supported on the Xeon Silver platform which is why we are not using faster speeds.
Here is the lscpu output for the Silver 4114:
For this exercise, we are using our legacy Linux-Bench scripts which help us see cross-platform “least common denominator” results. We do have a full set of expanded benchmarks from our next-gen test suite (Linux-Bench2) so expect to see those results sprinkled in as we get a larger comparison data set built.
This is one of the most requested benchmarks for STH over the past few years. The task was simple, we have a standard configuration file, the Linux 4.4.2 kernel from kernel.org, and make the standard auto-generated configuration utilizing every thread in the system. We are expressing results in terms of compiles per hour to make the results easier to read.
Intel Xeon Silver 4114 Linux Kernel Compile Benchmark
There are two keys to performance here. First, the base clocks creep up from the Xeon Silver 4110. Second, there are two additional cores. Those two factors combine to add significant performance.
We have been using c-ray for our performance testing for years now. It is a ray tracing benchmark that is extremely popular to show differences in processors under multi-threaded workloads.
Intel Xeon Silver 4114 C Ray Benchmark 4k
Here c-ray is hyper-sensitive to architectural differences. It is best used to compare CPUs within the same generations and families. Again, higher clock speeds and more cores help in the Xeon Silver line.
7-zip is a widely used compression/ decompression program that works cross-platform. We started using the program during our early days with Windows testing. It is now part of Linux-Bench.
Intel Xeon Silver 4114 7zip Compression Benchmark
We found a number of decent comparison points and crammed them into this chart. The Xeon Silver 4114 single socket performance is about that of the AWS c4.4xlarge here. You can also notice significant separation between the 4110, 4114 and 4116.
NAMD is a molecular modeling benchmark developed by the Theoretical and Computational Biophysics Group in the Beckman Institute for Advanced Science and Technology at the University of Illinois at Urbana-Champaign. More information on the benchmark can be found here. We are going to augment this with GROMACS in the next-generation Linux-Bench in the near future. With GROMACS we have been working hard to support Intel’s Skylake AVX-512 and AVX2 supporting AMD Zen architecture. Here are the comparison results for the legacy data set:
Intel Xeon Silver 4114 NAMD Benchmark
Although we are transitioning to GROMACS, our use of NAMD is still interesting as it shows some intriguing performance scaling through the different lines. Here one can see nice scaling between the 8, 10 and 12 core offerings in the Xeon Silver line (4110, 4114, and 4116 respectively.)
We also left the dual Xeon L5520, single hex-core L5640, and dual E5-2620 V1 results in there for a sense of performance compared to older generation parts that are due for upgrades.
Sysbench is another one of those widely used Linux benchmarks. We specifically are using the CPU test, not the OLTP test that we use for some storage testing.
Intel Xeon Silver 4114 Sysbench Multi-Threaded Benchmark
Here we see solid scaling in the Intel Xeon Silver line. What we did want to take a moment to show is single threaded performance:
Intel Xeon Silver 4114 Sysbench Single Thread Benchmark
The key takeaway here is that the 3.0GHz max turbo essentially caps single-threaded performance for the Xeon silver line. If you are using only 1-2 cores, get the Silver 4108 and do not fool yourself into thinking spending almost twice as much for a CPU will make you better off.
We normally only publish power consumption data on full systems we review. There are too many variables for this data to land in a CPU test. At the same time, we wanted to highlight the Intel Xeon Silver 4114 which hit a maximum of around 101W measured at the outlet in our testing. While it may be an 85W TDP part, with 10Gbase-T links active, a SAS 3008 12gbps controller and a number of drives / DIMMs in the system, the TDP rating is significantly higher than actual power consumption.
Market Positioning
This is certainly an intriguing part. It is about $200 more than the Intel Xeon Silver 4110 with only 8 cores. In terms of single thread performance, the Intel Xeon Silver line is amazingly similar based on the 3.0GHz max turbo clocks across the board. In multi-threaded workloads is where the extra cores and higher base frequencies help.
If you are purchasing a server, $200 is a 40% premium for about 30% more multi-threaded performance, and similar single core performance, compared to the Xeon Silver 4110. In a $2000 server, that is really a 10% premium. Likewise in a $5000 server with add-in cards and storage, it is a negligible additional 4%.
If you are comparing to the previous generation Intel Xeon E5-2630 V4 you are getting the same number of cores for a 10% or so premium and lower maximum turbo speeds. You do get more PCIe lanes, more DDR4 memory channels, but it is slightly unnerving to see Intel charging more for a similar part that comes out a full generation later. While Xeon Silver does get AVX-512, it receives the neutered version compared to Xeon Gold and Platinum. Likewise, the higher-end RAS features are found only on the higher-end chips.
The “elephant in the room” is AMD EPYC. At around $700, you are in price ranges of 16 core EPYC parts (e.g. the EPYC 7351P and EPYC 7281.) You can make an argument that Intel has some per-core performance advantages, but the advantage Intel has is not 60% per core. EPYC has the larger platform (8 DDR4 channels per socket and 128 PCIe lanes) but uses more power. The strange part here is that Intel is essentially increasing pricing just as AMD entered as legitimate competition.
One may have noticed that we have tested a huge segment of the market. The sub $1500 per CPU market accounts for around 50% of the total CPU volume from what we are told. In most servers, this is a good upgrade over the Xeon Silver 4110. For a quick reference, here is the order, in terms of performance, of the Xeon Silver line:
4112 -> 4108 -> 4110 -> 4114 -> 4116
Unless you are under an expensive per-core licensing regime, skip the Xeon Silver 4112. Feel free to read about that chip more in our Intel Xeon Silver 4112 Linux Benchmarks and Review. Otherwise, this is a significant and worthy step up from the Xeon Silver 4110.
