[Esp]
¡Saludos comunidad!
Estoy probando unas cosas con resina, empecé con llaveros, quería saber si resistían una impresión sin borrarla y el resultado fue genial.
¡Funciona!
Puedes imprimir tus diseños y cubrirlos con resina UV, quedarán sólidos y bonitos.
Mi diseño queda algo opaco de color, esto es porque las tintas que estoy usando son tintas para sublimar, con una impresora de tinta casera te quedarán más lindos aun.
Imagina tener una foto de tu ser querido o tu artista favorito o lo que sea para combinar accesorios... Me encantó.
Te cuento cómo lo hice y al final dejo la referencia como siempre.
[Eng]
Hello everyone!
I’m experimenting with resin – I started with key rings, as I wanted to see if the print would hold up without fading, and the result was brilliant.
It works!
You can print your designs and cover them with UV resin; they’ll come out sturdy and lovely.
My design looks a bit dull in colour; this is because the inks I’m using are sublimation inks. With a home inkjet printer, they’ll look even better.
Imagine having a photo of a loved one, your favourite artist, or whatever you like to match your accessories… I loved it.
I’ll tell you how I did it and, as always, I’ll leave the reference at the end.


| Spanish | English | |
| Foami | Foam | |
| Silicón líquido | Liquid silicone | |
| Tijera | Scissors | |
| Stickers | Stickers | |
| Lámpara UV | UV lamp | |
| Pinzas de bisutería, perforador | Jewellery pliers, paper punch | |
| Accesorios | Accessories | |
| Aro de llavero, cadena y caimán | Keyring ring, chain and alligator clasp | |
| Silicón frío | Cold silicone |

[Esp]
Imprime los diseños o usa stickers, debes imprimirlos dos veces, la segunda imagen debes invertirla, para que queden iguales al voltear. Recorta.
Pega la primera figura al foami asegurándote que la pega llegue a las orillas y quede bien pegado, sin levantamientos.
Recorta el foami con la forma de la figura.
[Eng]
Print out the designs or use stickers; you’ll need to print them twice, and the second image must be mirrored so that they match when turned over. Cut them out.
Stick the first shape onto the foam, making sure the glue reaches the edges and that it’s firmly stuck down, with no lifting.
Cut the foam to the shape of the figure.

[Esp]
Pega la imagen del otro lado.
Abre un orificio con el perforador de papel.
Aplica una capa de resina uv en un lado primero, lee las instrucciones el tiempo que requiera estar bajo la lámpara, el mío dice 1 minuto sin embargo lo toqué y estaba pegajoso aun, así que lo dejé por un minuto más y quedó perfecto.
Luego repite el mismo paso con el otro lado.
[Eng]
Stick the image onto the other side.
Make a hole using the hole punch.
Apply a coat of UV resin to one side first; read the instructions to see how long it needs to be under the lamp. Mine says 1 minute, but when I touched it it was still sticky, so I left it for another minute and it turned out perfectly.
Then repeat the same step with the other side.

[Esp]
Preparamos el llavero.
Colocamos los accesorios que queramos en la cadena.
Luego colocamos el caimán en la cadena.
Seguido, colocamos nuestra imagen cubierta de resina en la cadena con la ayuda del arito, para ello usamos las pinzas.
Espero les guste. A mí me encantó el resultado.
[Eng]
Let’s make the key ring.
Attach the accessories of your choice to the chain.
Then attach the alligator clip to the chain.
Next, attach the resin-coated image to the chain using the ring; use the pliers to do this.
I hope you like it. I absolutely loved the result.


Program: MediBang Paint Pro.
Tablet Huion model 420


💜💜💜
| 👉 Youtube | Tik Tok | 👉 IG | 👉 X |
