Saludos queridos Amigos
Greetings dear friends
Feliz y bendecida noche tengan todos, es para mí un gran placer el poder compartir con ustedes una vez más, el día de hoy quise traerles un hermoso diseño que elabore para todos ustedes, pensando cada día en la creación de nuevos acsesorios fáciles y sencillos de elaborar e realizado el día de hoy unos hermosos zarcillos que a pesar de no parecerlo son super sencillos de elaborar. Este es un diseño muy elegante elaborado con la tecnología de Alambrismo y decorado con hermosos cristales.
Happy and blessed night everyone, it is a great pleasure for me to be able to share with you once again, today I wanted to bring you a beautiful design that I made for all of you, thinking every day about creating new easy accessories and simple to make and made today some beautiful tendrils that despite not looking like it are super easy to make.
This is a very elegant design made using Wirewound technology and decorated with beautiful crystals.
For all of you I made this post in a tutorial where you can observe and learn how to make these beautiful tendrils step by step.
Que necesitamos
- Alambre de bisutería calibre 20.
- Cristales color azul.
- pinza de bisutería.
What we need
- 20 gauge jewelry wire.
- Blue crystals.
- jewelry clip.
Paso a paso
Step by step
✴️ Paso 1: Primeramente tomaremos el alambre de bisutería calibre 20 y picaremos un pedacito de 4 cm, este lo doblaremos por la mitad en forma de "V" y con ayuda de nuestra pinza de bisutería doblaremos ambas puntas o extremo formando pequeñas argollas.
✴️ Step 1: First, we will take the 20-gauge jewelry wire and cut a 4 cm piece, we will fold it in half in the shape of a "V" and with the help of our jewelry pliers we will bend both ends or ends, forming small rings.
✴️ Step 2: to continue we cut another 2cm piece of wire to which with the clamp we will make a circular ring shape at one of its ends, then we will introduce a blue glass and close the shape making another ring at the other end, leaving it small part.
✴️ Paso 3: Luego cortaremos otro pedazo de alambre de 4 cm y realizaremos el mismo procedimiento anterior, con la diferencia que en esta ocasión Introducimos 3 cristales, osea la pieza será un poco más grande. De igual manera elaboraremos una pieza con 5 cristales y otra con 7 cristales. A estas 4 piezas les daremos una forma de onda hacia abajo.
✴️ Step 3: Then we will cut another 4 cm piece of wire and we will carry out the same procedure as before, with the difference that on this occasion we introduce 3 crystals, that is, the piece will be a little bigger.
In the same way we will make a piece with 5 crystals and another with 7 crystals.
We will give these 4 pieces a downward wave shape.
✴️ Paso 4: Ahora tomaremos 4 cm de alambre y con ayuda de la pinza Elaboremos pequeñas formas o argollas circulares. Para cada Zarcillo necesitaremos 6 argollitas.
✴️ Step 4: Now we will take 4 cm of wire and with the help of the pliers we will make small shapes or circular rings.
For each tendril we will need 6 rings.
✴️ Paso 5: para continuar tomaremos la primera pieza en forma de "V" colocando la punta hacia arriba, la uniremos a nuestra pieza de un cristal Introduciendo las argollas de la pieza de cristal a los ganchos de la forma de V alrevés. Seguidamente en cada argolla de esta pieza con un cristal colocaremos una pequeña argolla la cual usaremos para unir la pieza con tres cristales tal cual pueden observar.
✴️ Step 5: to continue we will take the first piece in the shape of a "V" placing the tip up, we will join it to our piece of glass Inserting the rings of the glass piece to the hooks of the V shape upside down .
Next in each ring of this piece with a crystal we will place a small ring which we will use to join the piece with three crystals as you can see.
✴️ Paso 6: siguiendo el paso anterior colocamos una argolla a cada extremo de la última pieza y allí guindaremos la pieza de 5 cristales y lo mismo elaboramos para guindar la pieza de 7 cristales.
✴️ Step 6: following the previous step, we place a ring at each end of the last piece and there we will hang the 5-crystal piece and do the same to hang the 7-crystal piece.
✴️ Paso 7: una vez lista nuestra base de zarcillos procederemos a elaborar con 3cm de alambre de bisutería un anzuelo para zarcillos el cual uniremos a nuestra Elaboración y listo. Ahora repetimos los pasos para elaborar la segunda pieza o par.
✴️ Step 7: once our base of tendrils is ready, we will proceed to elaborate a hook for tendrils with 3cm of costume wire, which we will join to our Elaboration and that's it.
Now we repeat the steps to make the second piece or pair.
zarcillos Largos
Long tendrils
And so we make beautiful and very elegant long earrings, which you can adjust to your tastes and preferences by changing the color and pamalo if you wish, they are ideal for special occasions, they weigh nothing and are super comfortable.
To say goodbye for this occasion, my dear friends, I want to thank you for accompanying me in this tutorial and I hope that this has been to the liking of all of you and that you are encouraged to follow this tutorial and make your own design at home.
Greetings and blessings.
All Photos are my authorship and were taken with my Redmi 9 Cellphone