I welcome you all to my blog, its is another new day and a day filled with greater expectations. Creativity is something I enjoy doing and many at times I spend hours doing that thing. Today I found myself bored and I decided to create a car out of cardboard and carton. The steps and process I used in achieving this masterpiece is really easy and simple to follow, here are the process I used in crafting out this piece.
step 1
First get all your material ready for use such as, gum, marker, broom sticks, carton, cardboard paper, scissors, and blade. After gathering all the required materials needed, I started by drawing the framework of the body on the carton first and then I cut it off. After carefully cutting it out, I then get a piece of carton and put in between them and gum them together so that it will look like this.
step 2
After getting the shape of the car, I then took another carton and gum it to the front to make the front glass and I also did the same for the back of the car also.
step 3
After I finished with that, I then went ahead to cover the top of the car with a brown cardboard paper, I also did the same for the front and the back as well.
step 4
After achieving the body and framework of the car, it was time for me to construct the tyres of the car. First I measured the length of the car and made something out of carton to cover the bottom of the car and it is also where the tyres will be placed on, so after i constructed such thing I then gum it to the under of the car.
step 5
After I gum it together ,I also gum a holder on top of it where the tyre's will be imbedded
step 6
This is the part where I constructed the tyre's, first I cut five circular carton and then i gum the five together. After doing that, I then took my broom sticks and some tape and tapped it round the broom stick and pierced it into the tyre of the car and applied some gun on top of it to enable it to be strong and rigid. I followed the same step for the other tyre's as well to get the same results.
step 7
After constructing the tyre's of the car, I then placed them on the under of the car where i gum the holder for the tyre's.
step 8
After getting the tyre's of the car, it was now time for me to do some colouring. I colored the front and the back screen, and then I also colored the windows attached to the door as well.
After the colouring I took some pictures of me and my car.
THANKS FOR READING
Best regards 