Today I decided to repair some cholas, flip flops or whatever you call them in your area, as they were starting to break and could still be saved and I thought of uploading it to the hive community, because someone else may find this information useful.In this first image you can see that it is starting to take off and well, today's objective is to give it a longer useful life, while it still has a clear repair.What we will need is a needle for sewing shoes that looks like that with a hook at the tip. And also the waxed thread, which is the one used for this type of work.The first thing to do is to fix a point where we will start sewing, luckily in my case I have this seam that will serve as a guide, but regardless of this the point should be the same.Luego será atravesar con la aguja ese punto y enrollar el hilo en la aguja, para luego sacar la aguja de donde entró, luego medir como se puede ver y preferiblemente que sobre un poco de hilo.It will be to go through that point with the needle and wind the thread onto the needle, then pull the needle out from where it went in, then measure as you can see and preferably have some thread left over.
To continue, we will do the same in the next seam, but now we will not remove the entire thread, but we will leave a small ring through which we will pass the piece of thread that we left and we will repeat the process until the end.To finish the last knot, we will not pass it only once but preferably three times.Para cerrar el nudo final jalamos fuerte y este sería el resultado, luego de cortar el sobrante.
Espero les haya gustado mi aporte gracias por leer
:D.
To close the final knot we pull hard and this would be the result, after cutting the excess.
I hope you liked my contribution, thank you for reading.
:D.