Devil Gundam: Scratch Building Knee [Leg Modification - Part 54]
Words
214
Reading
1 min
Listen
Play
8y
Hi guys!
Today I will do a clean up on the knee then resharpen some edges. So here are updates on Project Devil Gundam!
Today I will do a clean up on the knee then resharpen some edges. So here are updates on Project Devil Gundam!
Cleaning Up
After letting the cement cure overnight, I trim off the pla plates that are sticking out.
I prefer using hobby knife on this one since it can remove most of the excess easily.
Then I switch to file to remove the rest of the excess.
I prefer using hobby knife on this one since it can remove most of the excess easily.
Then I switch to file to remove the rest of the excess.
Adjusting the Knee
Since this is my first try at making something three dimensional, some of the edges aren't at the same angle. So I have to adjust some sides manually.
I start with pencil marks where I should trim off. From there I will file down the surface until I get that symmetrical shape.
I start with pencil marks where I should trim off. From there I will file down the surface until I get that symmetrical shape.
Manual Adjustment
I've adjusted as best as I can for now. Next I will do a quick test fit with the thigh, waist and bottom leg. From there I can decide whether to proceed or do some more adjustments.
And so this is my updates for today on this Devil Gundam x Neue Ziel Project.
Keep on building! Keep on steeming! Have a nice day!
And so this is my updates for today on this Devil Gundam x Neue Ziel Project.
Keep on building! Keep on steeming! Have a nice day!
Quick access tutorial:
- Fixing broken peg using gunpla runer and several tools.
- Fixing holes using cement and plastic scraps.