Devil Gundam: Detailing Bottom Leg [Leg Modification - Part 79]

Hi guys!

Today I will cement a couple of pla plates to the mechanism for detailing purpose. So here are updates on Project Devil Gundam!

I start with cementing these set of pla plates to the bottom part of the mechanism. For this one I use regular and thin cement.

The regular cement is use on the back end of the pla plates since cleaning the front part is going to be difficult. Notice how small the space I left it with.

I also use thin cement around the backside of these pla plates so they won't slide back and forth from their position. All that's left is to leave this overnight to cure.

Since the pla plates on one of the mechanism are quite loose, rather that redo the details I just put a clamp on them to hold it in place.

I also cement the bottom part with a thin pla plate for cover otherwise the hollow underside might be visible.

The clamp is making sure that the pla plates are align with each other while the cement is curing. So these are my update on Project Devil Gundam for today.

Tomorrow, I will clean up the excess pla plates and cement then reshape some of them. Keep on building! Keep on steeming! Have a nice day!