Another rejected article - If you don't get the point of these posts, read my introduction.
Since the risk of infection has become a significant concern after putting in dental implnats, orthopedic coatings have become increasingly popular. With correctly coated dental implants, a patient will have a significantly lower risks of contracting an infection. The correct materials must also be used for orthopedic coatings in order to prevent an infection. Prior to diving into the decision to purchase coatings, you shoud be aware of the pros and cons of this practice.
PRO - Decreased Damage To The Surrounding Area
Installing dental implants can be a rough process. With the application of a coating, an implant can fit in much smoother. It can be quite risk if an implants cuts the surrounding tissues resulting in excessive bleeding.
PRO - Faster Recovery Time
If the implant does not irritate or harm the surrounding tissue, this means that it will be easier to be integrated within the body. Less irritation and damage means a much quicker recovery time.
PRO – Corrosion Protection
Coatings on metal implants protect the material from harmful rust. If the implant rusts, it will obviously deteriorate and cause the need for an expensive replacement.
CON – Time Consuming
Healthcare facilities need to set aside a lot of additional time and resources to give their implants a coating. Although it can be more expensive, it is worth ordering and coating bulk pieces in advance to have it ready for emergencies.
CON – Temperature Sensitive
Certain materials used with coatings may be damaged with temperature changes. Too cold of weather is known to cause cracking in some coated implants.
Just like with any other service, you should do your homework and use the most competent contractor. The coated implants should also be thoroughly inspected with methods like cytotoxicity or biocompatibility.
N2 Biomedical is a primary provider of Orthopedic Coatings and othe medical coating services. They have years of experience and produce over 500,000 coated products a year. Not only do they work with the medical industry, but also automotive and computer hardware companies.
