Manual works - Abacus
The abacus is a counting tool in China.
The top one represents 5,
The next one represents 1,
Each column,
From right to left,
Representing single digits / tens digits / hundred digits / thousand digits / and so on.
Work with children today.
I have a big box of plastic beads.
Seeing he is playing abacus,
so, I taught him how to do Manual work - abacus.
Material: hard cardboard + iron wire + plastic beads
Tools: Ruler + Needle
The drawing of the lines is as follows,
I set the height to 1 cm.
So the short side of the picture all is 1 cm.
(Chinese language:线条的画法如下面,
我是设定高度为1公分,
所以图中的短边都是1公分.)
after cut as shown below.
(Chinese language:剪下後如下圖.)
The paper folding method is shown in the following two figures.
(Chinese language:纸张折叠方法如下面2张图所示。）
After the paper is folded, glue it, as shown below.
(Chinese language:纸张折好之后，黏上胶水，如下图。）
wear thesse small holes with a needle and put on the iron wire and plastic beads. After the completion, it is an abacus.
(Chinese language:用针穿好小洞，穿入铁线和塑胶珠子，完成之后，便是算盘了。）
劳作 - 算盘
算盘是ㄧ种中国的计数工具,
上面1颗代表着5,
下面1颗代表着1,
每一纵列,
从右到左,
分别代表着个位数/十位数/百位数/千位数/依此类推.
今天和小孩子做劳作.
我有买一箱的塑胶珠子,
看到他在打算盘,
便教了他如何做劳作-算盘.
材料: 硬纸板 + 铁线 + 塑胶珠子
工具: 直尺+针+剪刀