How to Staking High Coin

I've written an article "How to Staking Deviant Crypto Coin", Now I want to explain how to staking High Coin. Not too different from deviant coins, but High coin does not provide a compiled daemon application. You have to compile it first by yourself.

To compile a daemon, you need additional libraries to install. Here are the commands that should be execute after you create a VPS.

sudo apt-get update
sudo apt-get -y upgrade
sudo apt-get -y dist-upgrade
sudo apt-get install -y nano htop git unzip
sudo apt-get install -y software-properties-common
sudo apt-get install -y build-essential libtool autotools-dev pkg-config libssl-dev
sudo apt-get install -y libqrencode-dev aptitude
sudo apt-get install -y libboost-all-dev
sudo apt-get install -y libevent-dev
sudo apt-get install -y miniupnpc
sudo apt-get install -y libminiupnpc-dev
sudo apt-get install -y autoconf automake cmake
sudo apt-get install -y libmicrohttpd-dev
sudo add-apt-repository -y ppa:bitcoin/bitcoin
sudo apt-get install -y libdb-dev libdb++-dev

Then, clone the source code of High coin with commands below.
cd /usr/local/src
git clone https://github.com/Healkiller/Highcoin.git

You need to clean up previously database compiled with following commands.

cd /usr/local/src/Highcoin/src/leveldb
chmod +x build_detect_platform
make clean
make libleveldb.a libmemenv.a

Then, let's begin to compiling. Execute the following commands.
cd /usr/local/src/Highcoin/src
make -f makefile.unix USE_UPNP=-

Wait until the compilation process is complete. This takes a dozen minutes. When done, you will see the highcoind file in /usr/local/src/Highcoin/src.