Hello everyone
How are you all my friends. I am fine by the grace of almighty.
Today I am very happy to do art and craft work. Always, I try to do craft by using waste or recyclable materials. Today, I try to make a pen holder by using Cork sheet, roll cardboard of tissu paper and others materials. This is a recycled craft.
So lets start my work step.
The ingredients of Pen holder :
- Roll cardboard of tissue paper - 5 pieces
- Plain cardboard
- Colored paper (pink)
- White paper
- Glue
- Watercolor (pink)
- Brush
- Cork sheet
- Wool yarn (pink color)
- Scissors
- Beads
How to make
Step-1
First I took the pink color. I set it to color in roll cardboard.
Then I took a roll cardboard and started painting the inside. I painted the whole part pink with the help of a brush.
After painting the inside I will paint the outside. That's why I started painting from one side. Gradually I painted the whole exterior.
- Similarly I painted the remaining 4 rounds of cardboard. After painting, I kept them separately to allow the paint to dry.
Step-2
- Then I took plain cardboard. I took it the size of a cork sheet. Then I cut 2 pieces of paper out of pink paper, measuring the edges of the cardboard.
After cutting the paper, I glued the edges of the cardboard. Then I put equal amount of paper on both sides and put pink paper on the edge of the cardboard.
Then I took the pink paper with a large size equal to the cardboard. I will cover it on both sides, so I cut it according to the size.
This time I put glue on one side of the cardboard and put it on one side of the paper. I also put glue on the other side of the cardboard and wrapped the paper. So I covered the cardboard.
Step-3
This time I will do the work of the cork sheet. So I took white paper, scissors, brush and glue in my hand. Of course with the cork sheet.
Now the edges of the cork sheet are a little broken so I will cover it with white paper. So I cut two white sheets of that size. Then I put glue on it and put it well on the edge of the cork sheet. I took a white paper cover on both sides.
Step-4
- After covering the cork sheet, I took the pink watercolor. With the color I started to paint on one side. When painting on cork sheet, I finished the color on one side and left it for a while to dry. Then when that part was dry, I dried the side part again.
- Gradually painted the whole cork sheet. I painted the upper part as well as the lower part. I completed the paint work.
- After painting whole cork sheet I put that on one side to dry.
Step-5
- I took a few types of beads. Some of these beads are very small. I took these for decoration.
- First I put the roll cardboards in the corksheet. Then I brought them to the front and saw that the visible part of the front as far as I can see, I will decorate the beads.
Step-6
- Then I took a roll cardboard and started decorating according to the size. In this case, I first took glue and brush. In the meantime, I designed and applied glue. After applying the glue, I spread the beads with my hands from above. These are sitting in gradually.
- In the same way I put beads on the remaining 3 roll cardboard according to the size. However, I did not put the bead on the middle roll cardboard.
- I put the bead and put the roll cardboards aside and dried them.
Step-7
- This time I will put the roll cardboards in the corksheet. That's why I glued the bottom of them. Then I put one from one side. One by one I put all the rounds in the cardboard corksheet. It was set very nicely.
Step-8
- Then I took the plain cardboard covered with pink paper. I'll put it down in front of the corksheet. That's why I applied glue in the meantime. After applying the glue, I put it on.
- A lot of work was done. Then the work of overall decoration. That's why I took small and medium bead. The beads are white. In this case, I put them next to it with the help of glue .Then I did the decoration work again with the help of the glue.
Step-9
- Then I will do a little more decoration work on the front with pink wool yarn. So I cut the yarn accordingly. I put it horizontally in plain cardboard. In this case I applied glue and then applied yarn.
After sewing the yarn, I designed the bead in the meantime.
This is how a very beautiful pen holder was made.
Hope you all will like my craft work.
Thank you so much for seeing my post.
Phone Details
| Camera | Smasung Galaxy |
|---|---|
| Catagory | (Photography) |
| C.MODEL | J5 Prime |
| Capture |  @bristy1 |
| Editing | Only seturation |
| Location | https://maps.app.goo.gl/nThhkEoYBJYcwC376 |