Photo designer for myself

Words
593
Reading
3 min
Listen
Play
6y


His sword could not bear the load, the shield fell apart. The tired warrior went into hand-to-hand combat. Does anyone want to fight him? Maybe on daggers?

Do not pay attention, it was a joke. The warrior worked as a model this time. But I'll tell you everything in order.

DSC041523.jpg

DSC041512.jpg

Его меч не выдержал нагрузки, щит раскололся на части. Усталый воин вышел в рукопашный бой. Кто-нибудь хочет с ним сразиться? Может быть на кинжалах?

Не обращайте внимания, это была шутка. Воин работал фотомоделью в этот раз. Но расскажу всё по-порядку.



Несколько заметок на полях для тех, кто захочет повторить опыт.

After the magic kick from wwwiebe@wwwiebe and johannpiber@johannpiber, I started working with the pinhole and got some results.

Appetite comes with eating and I have it. I picked up a lens from a children's slide projector. I can not imagine a simpler lens. Two magnifying glasses and two tubes.

После волшебного пинка от wwwiebe@wwwiebe и johannpiber@johannpiber я начал работать с пинхолом и получил некоторые результаты.

Аппетит приходит во время еды и он у меня появился. Я взял в руки объектив от детского диапроектора. Более простого объектива я не могу себе представить. Два увеличительных стекла и две трубки.

As you can see, everything is very simple. I removed the regular lens from the camera and with one hand applied this toy to the right place. But there is one subtlety. Both glasses have a bulge in one direction, while the other side is flat.

For this reason, we can get four options for assembling this lens: both bulges outward, both bulges inward and mixed in one and the other.

Each time I took a control shot for later comparison. These pictures are shown below.


Как видите, всё очень просто. Я снимал штатный объектив с камеры и одной рукой прикладывал эту игрушку к нужному месту. Но здесь есть одна тонкость. Оба стекла имеют выпуклость в одну сторону, при этом другая сторона плоская.

По этой причине мы можем получить четыре варианта сборки этого объектива: обе выпуклости наружу, обе выпуклости внутрь и смешанно в одну и другую стороны.

Каждый раз я делал контрольный снимок для последующего сравнения. Эти снимки приведены ниже.


ISO100 1/80

Photos are presented without processing. I also did not choose a plot or anything else. This is just a test photo with a small figure fit into the frame. At the same time, the figure does not have a contrasting color and a clear geometry. If you slightly adjust the basic settings, you can get a more pronounced form.

Фотографии представлены без обработки. Я также не выбирал сюжет или что-то ещё. Это просто тестовое фото с маленькой фигуркой поместившейся в кадр. При этом фигурка не имеет контрастной расцветки и чёткой геометрии. Если немного подкорректировать базовые настройки, то можно получить более выраженную форму.

Then I found another figure and at the same time brought the lens closer to the matrix. This allowed to put a larger figure at a farther distance from the camera..

Потом я нашёл другую фигурку и при этом приблизил объектив к матрице. Это позволило поставить более крупную фигурку на более дальнее расстояние от камеры.

Of course, I could not resist and instead of this lens I tried to put a pinhole. It turned out a curious result. But that's another topic.

Конечно, я не удержался и вместо этого объектива попробовал поставить пинхол. Получился любопытный результат. Но это уже другая тема.

To be continued...

Unless otherwise specified, the text and photos are mine

@bambuka Blog Navigation


From Russia with Love


My last posts