It is now building materials soared the price. How to anticipate so that we can be more efficient in building a decent house and the maximum results but small capital. Here I just talk about one field only from building materials that is brick. Red brick here Rp.750 , - so 1000 Rp.750.000, - already arrived at home, in make a house size 5 脳 10 m must require at least 13,000 bricks.Wah how much rupiah you have to spend? Try to count yourself ... .. !!!! and for the mud just need sand and cement a lot of pretty much and how easy installation but it takes a long time.
But do not worry Brooo, here I present the solution is economical. This I have proved myself and the results are incredible. That is for own brick, which is a brick of sand + cement.
Usually the size of the size of the brass is big size 10cm long 40cm and 18cm height is the size that I ever make.Brick also not complicated as red brick must be burned let mature.this does not need mass brooo, just in the order in the shade is ready and ready in wearing. try to think red bricks should be burned, the cost to burn just need wood and merang that all, from to burn to brick better to cook, right?
Excess brick:
Okay here I teach to make the brick easy and efficient and fast in makes.
Here I present it manually.
CREATE MOLD
The trick is looking for wood with length about 10cmx3cmx300cm
We make my size is 10cmx18x40cm.hope wood cut with saws and shape like mold brick.
And inside you cover with zinc aluminum or zinc gutters, measure in accordance with cracks and nails wear tacks Eyelash trim.
If it is finished please look for blabak for cast for pedestal and used oil for mold lubricant.
MIX SAND / CEMENT
Sand 9 bucket you sift with a crude sieve for masonry
Semen 1 bucket
3 drops
You mix and stir by using a screw first.tetes later, hope you mix together with water.
If it is well blended please be given a lot of water such as make mud for couple, but according to my analysis of cement it takes a lot of water will add strong. This is another lo with brick usually only need water a little, but here otherwise.
If you have stirred with a hoe and let stand for half an hour of your new print.
HOW TO PRINT BRICK
Provide the board first, then rub with used oil with satisfaction
And also basting mold batakonya also with lubricating oil formerly
After you apply it please input the mud half mold first and you mash using wood beams let me solid, after that give a stone or red brick or whatever is dense inside and cover the mud until evenly and mash until solid and evenly, after that you lift such as printing bricks, let sehai last night, when it is harden you lift it and place it in the shade let it slow dry, because if it is too fast dry brick hard and brittle stone, after 7 days hope you flush with water so strong.
That's the process of making bricks, do you like this article? I hope you guys like it.
Hopefully this post can be useful for all friends steemit #homesteading #homesteadersonline #life #howto 
Greetings separated from me 
For your attention I thank you all.
