Hi, I started into vaping two years ago. Some vaper's usually recommends a pen type but not in my case.. I started in a variable one, Kangertech Subox mini kit, a single battery type, 50-watts max power and with a minimum 0.20 ohms to fire. I used it for almost two months and i started to love it.. I started to buy some upgrade like atomizer(the one responsible for the cloud or smoke(usually the term used by non-vapers). It contains coil(responsible for the heating of e-juice) and cotton where you put the e-juice.), an Rebuildable Drip Atomizer(RDA). As I go with the trend, I stumbled into a Mechanical type vape, a tube type to be exact.. Invented by SUBOHMINNOVATION the SUBZERO.. As I started into Mech Types, I researched for do's and don'ts, as I go further it always comes up into coil building and battery AMPS(battery's max continuous discharge rate). So for safety I started into building a normal 5-loops 24awg kanthal. But i started to widen my knowledge into vaping so I researched and experimented but i need to secure my safety first so i buy a new vape mode which is Tesla Invader III by Tesla Cigs, a semi-mech type mode which has a safety features which won't fire when your coil is below battery amp limit. As I searched and experimented, I make a Jugernut, Tiger, Clapton, and Twisted one. As far as I made, I fell in-love in a twisted one, It was made by putting two 24awg kanthal and twisted it. But here's come the problem. My battery can't handle the amps of my loved build so I searched for solutions, I came up to by a new mod, a dual battery full mech mod, just like a tube type but double the amp limit. It is my vape mod until now I love the clouds and flavor. My build as for today is 5loops twisted 24awg and 22awg in a 3mm inner guide.
