Editing photos
Editing is the process of moving and organizing video shot / image recording into a new image recording and nice to see. In general, editing is related to the post-production process, such as titling, color correction, sound mixing.
However, in general, the purpose of editing is as follows:
- Moves unwanted video clips.
- Choose the best picture and clip.
- Creates current.
- Add effects, graphics, music etc.
- Change the style and mood and step of the picture.
- Provides an interesting angle for the recording.
First
First open the Ligtroom app, then click "ADD PHOTO" at the bottom, then choose which photo you want
edit.
Second
In the rightmost menu you choose, after that you select the main menu. Fill in the presets as shown below:
- EXPOSURE -O, 63
- CONTRAST-3
- FEATURE -76
- SHADOWS +71
- WHITES -100
- BLACKS -69
- CLARITY +100
- VIBRATION -75
- SATURATION +19
NB: for presets above, not necessarily the same, adapt to the needs.
Third
You enter the Color / B & W menu, fill in "HUE", like the image below, how to move to the right or left of the color.
- Red: +79
- Orange: +100
- Yellow: -100
- Green: -94
- Green Tosca: +100
- Blue: -100
- Purple: -100
- Pink: -100
NB: for presets above, not necessarily the same, adapt to the needs.
Fourth
Move or go to the "SATURATION" menu, then fill in the preset as follows:
- Red: -70
- Orange: +100
- Yellow: -100
- Green: -60
- Green Yearning: -100
- Blue: -100
- Purple: -100
- Pink: -12
NB: for presets above, not necessarily the same, adapt to the needs.
Fifth
Move or scroll the LUMINANCE menu, then fill in the preset as follows:
- Red: -100
- Orange: -24
- Yellow: -46
- Green: -34
- Green Yearning: -54
- Blue: +26
- Purple: -100
- Pink: +42
NB: for presets above, not necessarily the same, adapt to the needs.
Sixth
Now change the menu to "Dehaze", then on "DEHAZE" tab, fill preset to +21
Seventh
Change menu to Vignetting, set AMOUNT to -30, MIDPOINT to 28, and FEATHER to 80
Eighth
Open the Tone Curve menu, change "MODE" to "Point" - "Blue", simply press "MODE", then change the settings to set the setting up and down the chart as needed.
@adeek