Hello everyone here in steemgis!

Today, I decided to try another segment in surpassinggoogle here in steemgigs which is (how-to).

And in this segment, I will show you (how- to) make a butterfly origami like this...👇

Actually, I already post this a few months ago in steemit but I will repeat to post it here if ever you miss it..😊

So, guys allowed me to do it.

Materials Needed

✔Construction paper

✔ Pencil

✔ Ruler

✔ Glue

✔ Scissor

Okey let's start guys...

First, you have to make a 8x8 inches size of construction paper for the body. While you have to make a 8x.25 inches for the antenna and 6x.50 for the binder.

got it guys?

After that follow this steps below;

1. Fold the paper into half and then unfold.

2. Fold the left and right side to meet at the center.

3. Fold the left side of the paper forming a diagonal line going down.Repeat this with the other side to form a big triangle inside.

from left...

to right..

4. Rotate the paper into 90 degrees then follow step no.3.

5. Turn the paper back and fold it up to .50 inches.

6. Repeat this untill you reach the end.

while doing it...

end....

7. Fold it in the middle.

done the body....

8. Set aside body.. Get the 8x.25 inches construction paper and fold it into half.

9. Get the ride side and roll it.Do this to the other side.

like this...

10. Get the body.Unfold the antenna and place it to the top of the body.

11. Get the binder and bind it. Put a glue at the end so it will not loose up.

while binding it.

put a glue..

12. Then spread the bottom and top wings..

while spreading it...

and were done!

That's it! I hope you cope up easily guys...hehehe

Thank you!!!