eMachines was known for their bargain basement desktop prices. While they made for very affordable PCs there's also that old maxim that you get what you pay for. The specs you got when you bought an eMachines computer were typically sufficient for the time but barely. Considering what you were paying that's not necessarily a horrible thing but reliability tended to be a mixed bag. I have a couple of eMachines in my collection that are decades old but still work fine so its not like reliability was bad across the board. Some models had their problems though. Power supplies were a notable failure point with some models.
I'm really not sure what the overall reliability of the ET1352-01 model was, only that the one I have still works fine. However, there's no doubt that the specs were pretty minimal. It had a single core CPU when multi-core CPUs had already long been the norm. It also came with only 2GB of RAM. This was more than the minimum of 1 GB required for Windows Vista but it hardly made having a 64-bit CPU worthwhile. Finally, it had an integrated video chipset that wasn't good for much of anything except basic display as opposed to a dedicated GPU. System specs include:
For more complete hardware info, check out the output from HardInfo.
This CPU is literally the slowest available on socket AM3. It isn't much faster than some Pentium 4s released several years earlier. However, I suppose you could say one good thing about it...it only used 10-20 watts of power.
Despite having the nVidia name, the integrated GeForce 6150SE was pretty useless for most major contemporary games. I'm sure it was better that whatever Intel was putting on motherboards but that really isn't saying much. I'm sure if you were interested in games that were several years older it probably would have been ok.
I guess the one nice thing about a very cheap computer with low end components is that there are a lot of potential upgrade opportunities. Or at least in some such cases there are and this is one of those cases. I believe in the case of this machine, it uses standard components so the sky is the limit if you want to completely gut it. However, it's not like the case is super high quality or otherwise particularly desirable so if you were going to go that far, you might as well buy a new case too.
Sticking with the original case, power supply, motherboard and drives, there is still a lot of upgrade room here. While it would not have shocked me if this computer was limited to 4GB, I was in fact able to upgrade it all the way to 8 GB. That puts it comfortably (from a memory perspective anyway) in modern Linux and Windows 10 territory.
The next obvious upgrade is the CPU. There is nowhere to go but up. In theory, you may be able to go as high as a Phenom II X6 which would give you a 6 core CPU. However, I was not really sure that this motherboard would reliably handle providing the power needed for that CPU. It's already old and those capacitors aren't getting any stronger. I decided to go with a Phenom II X4 910e. It runs at 2.6 GHz (almost a full GHz faster than what was in it) as well as providing 3 more cores. That's like 5x the computing power before taking into account things like additional cache.
Finally, I added a dedicated GPU. Sticking with the original power supply means that my choices are somewhat restricted. Probably anything that does not require an additional power connector would be ok. I stuck in an nVidia Quadro 600 just because I had one around. Something like a GT 1030 would be much better but even this Quadro is orders of magnitude better than the build in chipset. With these upgrades in can comfortable run a modern Linux distribution or Windows 10. I currently have Xubuntu installed.
There's no doubt this was an extremely low-end machine as configured. Fortunately, it has a pretty significant upgrade path making it a reasonable value for those looking to tinker with their machine but not wanting to build one up from scratch. Certainly it is better than those bargain machines that are maxed out on older architecture with little or no upgrade path.
Like all the machines I operate, this one is crunching various BOINC tasks when it is on. Since it has a 64-bit CPU it can crunch tasks for pretty much any project. So far, it has complete tasks for Einstein@home, Asteroids@home, Milkyway@home, Rosetta@home, and World Community Grid. No tasks for Universe@home yet as I write this but there haven't been any available. You can also check out how it is doing overall at Free-DC.
