Entry for the Shadow Hunters Contest Round ~326 SMASh Shadow the rods that will help us create the Riostra Beam

Grateful for sharing a new post here in the #ShadowHunters community and its weekly contests, this time it's the number ~326, thanking as always @melinda010100 for belonging to this great community.

Agradecido por compartir una nueva publicación aquí en la comunidad #ShadowHunters y sus concursos semanales en esta ocasión toca el número ~326 dando cómo siempre las gracias a @melinda010100 por pertenecer a esta gran comunidad.

Today while my uncle was assembling some rods to be a brace beam which is implemented to join the foundations in the construction that we are working on right now. I took several photographs from different angles so that they can be seen very well. Finally, I will show you what it looks like before pouring the concrete. In addition, a little patience and care is needed when working since to tie the straps since the wire is very sharp and can hurt us a lot if we are not very careful.

El día de hoy mientras mí tío estaba realizando el armado de unas cabillas para que ser una viga de riostra la cuál es implementada para unir los cimientos en la construcción qué estamos ahora mismo trabajando. Tomé varias fotografías desde distintos ángulos para que se puedan apreciar muy bien para finalizar les muestro como queda antes de vaciarle el concreto. Además se necesita un poco de paciencia y cuidado al trabajar puesto que para amarrar los sunchos ya que el alambre es muy filoso y nos puede hacer mucho daño si no tenemos mucha precaución.

H2
H3
H4
3 columns
2 columns
1 column
6 Comments
Ecency