Making peppa pig pin | Polymar clay DIY

I got a commission from my friend to make a peppa pig pin, so here's how I make it!


The clay that I used is Sculpey clay, after mixing the colour that I want, I roll it flat and make the size similar to the printed peppa pig.
IMG_20210801_133622.jpg!
Then I place the paper on top...
IMG_20210801_133648.jpg
And trim it using a knife
IMG_20210801_133711.jpg
Done!
IMG_20210801_134056.jpg
Then, I smooth the sharp corners out using my hand.
IMG_20210801_135129.jpg
Done baking!
IMG_20210801_154432.jpg
It's time to paint the face details.
Before that I sketch the face details lightly using pencil.
IMG_20210801_155454.jpg
Then I paint it using acrylic!
IMG_20210801_163844.jpg
Put the eyes in...
IMG_20210801_165429.jpg
I paint the back too
IMG_20210801_170624.jpg
Put UV resin over after waiting for the acrylic to dry.
IMG_20210801_173329.jpg
After putting it under the sun to dry, I flip it over and put UV resin on the back part to protect the paint, then leave it under the sun again.
IMG_20210802_115135.jpg
It's done! Shinny boi.
IMG_20210802_152616.jpg
Finalize it with sticking the pin to the back part.
IMG_20210802_155113.jpg
Its done!
IMG_20210802_155148.jpg
Place it on the backing cards and it's ready to travel to it's owner!
IMG_20210802_181022.jpg
.
.
.
.
.
.
Thank you for reading!
Hope you have a nice day! ❤️

Instagram shop: https://www.instagram.com/thecozybun/
Facebook art page: https://www.facebook.com/Yunasart99
Instagram art page : https://www.instagram.com/yuna_9988/
Youtube Channel: https://www.youtube.com/channel/UCTdm_nMFjLby_7PJNzgoomA
Visit my Redbubble store: http://Yuna99.redbubble.com
NFT Showroom: https://nftshowroom.com/yunayuna/gallery|

H2
H3
H4
3 columns
2 columns
1 column
9 Comments
Ecency