(Span/Eng) Fabricación de Lámparas Recicladas Con Cable Usb/ Manufacture of Recycled Lamps with Usb Cable
Manos a la obra, fabriquemos las lámparas recicladas.
Lámpara fabricada con bombillos LED
Materiales:
4 Bombillos LED
Cable Usb
Silicon
Pistola de silicon
Exacto
Tijeras.
Cargador de tlf con puerto Usb
Teipe Negro
Procedimiento:
Armar el foco con los bombillos, pegar.
Unir los cables positivo y negativo para que no haya un cambio de polaridad y evitar que se quemen los bombillos.
Probar si enciende al conectar el cable en el cargador con puerto usb. Dejar encendida unos minutos para verificar su funcionamiento.
Lámpara fabricada con bombillos de luces de navidad
Materiales:
5 Bombillos de luces de navidad
Para el foco partes de una linterna dañada
El resto son los mismos materiales de la linterna anterior.
Procedimiento:
Probar los bombillos de luces de navidad, uno por uno para verificar que enciendan.
Hacer un orificio al foco, para pasar los cables por allí.
Unir los cables, de los bombillos con el cable usb, revisar que prendan
Conectar y dejar encendida unos minutos.
Espero que te haya gustado este post.
Las fotografías fueron tomadas con un Motorola E6s.
El traductor empleado fue Deepl.com
Gracias por estar allí.
English Version
Manufacture of Recycled Lamps with Usb Cable
In this opportunity I made an inventory of those flashlights, that are getting damaged, I recovered the functional parts still and I share with you the manufacture of some lamps that can serve in your computer or desk with usb port, useful to illuminate the keyboard at night or see some necessary notes, without the need to keep the lights of the room on.
In my case I use one of these lamps to illuminate a corridor in my home during the night to have a dim light there.
Let's get to work, let's make the recycled lamps.
Lamp made with LED bulbs
Materials:
4 LED bulbs
The parts for the light bulb were taken from a damaged lamp in a mattress inflator.
Usb cable
Silicon
Silicone gun
Exactly
Scissors.
Tlf charger with Usb port
Black Teipe
Procedure:
Initially the light bulbs and the continuity of the cables to transmit the electrical energy must be tested.
Assemble the bulb with the bulbs, glue.
Connect the positive and negative wires so that there is no change in polarity and prevent the bulbs from burning out.
Test if it lights up when you connect the cable to the charger with USB port. Leave it on for a few minutes to check its operation.
Lamp made of Christmas light bulbs
Materials:
5 Christmas light bulbs
For the light bulb parts of a damaged flashlight
The rest are the same materials as the previous flashlight.
Procedure:
Test the Christmas light bulbs, one by one to make sure they're on.
Make a hole in the bulb, to pass the wires through.
Join the wires of the bulbs with the USB cable, check that they turn on
Switch on and leave on for a few minutes.
I hope you liked this post.
The pictures were taken with a Motorola E6s.
The translator used was Deepl.com
Thank you for being there.