Primer paso: || First step:
▪️ Para crear esta caja necesitaremos un rectángulo de 21 cm x 29,7 cm, al tener el rectángulo se debe doblar a la mitad.
To create this box we will need a rectangle of 21 cm x 29.7 cm, having the rectangle should be folded in half.
Segundo paso: || Second step:
▪️ A su vez las mitades deben doblarse en medio también.
In turn, the halves should be folded in the middle as well.
Tercer paso: || Third step:
▪️ Uno de los extremos de la cartulina debe ser doblado pero dejando una medida de 1,5 cm.
One of the ends of the cardboard should be folded but leaving a measurement of 1.5 cm.
Cuarto paso: || Fourth step:
▪️ Al obtener el dobles de 1,5 cm se deben doblar los extremos de la cartulina formando el cuello de la camisa, tengan como referencia la imagen de este paso.
When the 1.5 cm folds are obtained, the ends of the cardboard should be folded forming the collar of the shirt, refer to the image of this step as a reference.
Quinto paso: || Fifth step:
▪️ La parte inferior de la pieza debe abrirse, cada solapa que levanten debe doblarse.
The lower part of the piece should be opened, each flap you lift should be folded.
Sexto paso: || Sixth step:
▪️ Ahora lleve el extremo inferior hacia el superior para crear la camisa, recuerden marcar bien en donde se produzca el dobles.
Now bring the lower end towards the upper end to create the shirt, remember to mark well where the folds occur.
Séptimo paso: || Seventh step:
▪️ Hagan un nuevo dobles de 1 cm al final de la camisa, el extremo de la camisa debe quedar en la parte trasera de la pieza.
Make a new 1 cm fold at the end of the shirt, the end of the shirt should be at the back of the piece.
Octavo paso: || Eighth step:
▪️ El dobles anterior nos servirá para marcar líneas y saber donde hacer los siguientes cortes, deben abrir todo la estructura y cortar donde indica la imagen, recuerden que esta debe ser una caja.
The previous doubles will help us to mark lines and know where to make the next cuts, you must open the whole structure and cut where the image indicates, remember that this must be a box.
Noveno paso: || Ninth step:
▪️ Ahora debemos asegurar la estructura con silicón, unan los cortes hechos a cada extremo de la camisa.
Now we must secure the structure with silicone, join the cuts made at each end of the shirt.
Décimo paso: || Tenth step:
▪️ Peguen considerando la forma deseada, además pueden decorar la caja con una pequeña corbata como fue mi caso, para ello usé dos foamis en diferentes colores, recorté las piezas y las uní a la camisa.
Glue considering the desired shape, you can also decorate the box with a small tie as was my case, for this I used two foamis in different colors, cut out the pieces and attached them to the shirt.
Imágenes tomadas desde mi Xiaomi Redmi Note 4. || Images taken from my Xiaomi Redmi Note 4.
Separadores hechos en Canva. || Dividers made in Canva.
Ediciones hechas en Canva. || Editions made in Canva.
Translator Deepl.