[ESP-ENG] ♻️ ✨ Hermoso Reloj Decorativo ✨♻️ Beautiful Decorative Clock ♻️⌚

Hola, mis queridos amigos del #Hive que tengan un feliz jueves, en esta oportunidad les voy a compartir como convertí una lata de atún vacía en un hermoso reloj el cual es un objeto bonito y al mismo tiempo útil y, además, es mucho más fácil de lo que crees.
!Espero que les guste mi proyecto creativo de del día de hoy!

Hello, my dear friends from #Hive, have a happy Thursday, this time I am going to share with you how I turned an empty tuna can into a beautiful clock which is a beautiful object and at the same time useful and, in addition, it is much more. easy than you think.
I hope you like my creative project today!

image.png

Materiales a utilizar:
• Lata de atún
• Silicon
• Mecanismo de reloj
• Foami verde
• 2 tapas plásticas
• Alfiler tipo barril
• Tela

The materials to use:
• Can of tuna
• Silicon
• Clock mechanism
• Green foam
• 2 plastic caps
• Barrel pin
• Cloth

image.png

Pasos:
• Iniciamos midiendo el diámetro de la base y luego abrimos un agujero por donde vamos a pasar la punta del mecanismo del reloj, seguidamente abrimos dos agujeros donde van las paticas que van a sujetar el reloj.

Steps:
• We start by measuring the diameter of the base and then we open a hole through which we will pass the tip of the clock mechanism, then we open two holes where the legs that will hold the clock go.

image.png

image.png

image.png

image.png

image.png

image.png

• Luego, marcamos en el foami la parte posterior de la lata, recortamos y pegamos, seguidamente forramos por el alrededor con la tela y luego le colocamos el mecanismo del reloj.

• Then, we mark the back of the can on the foami, cut and glue, then we cover the around with the fabric and then we put the clock mechanism on it.

image.png

image.png

image.png

image.png

image.png

image.png

image.png

image.png

• Ahora tomamos las tapas plásticas y la forramos con foami y tela y seguidamente la pegamos en la parte de arriba de la lata.

• Now we take the plastic lids and we line it with foam and fabric and then we glue it to the top of the can.

image.png

image.png

image.png

image.png

image.png

image.png

• Seguidamente forramos cuatros botones y decoramos nuestro reloj.

• Next we cover four buttons and decorate our clock.

image.png

image.png

image.png

image.png

• Terminado mi hermoso Reloj decorativo ! Espero les haya gustado mi proyecto!

!Hasta la próxima!

• Finished my beautiful decorative Clock! I hope you liked my project!

!Until next time!

image.png

image.png

image.png



gracias_por_leer.jpg



Las fotografías fueron tomadas con un teléfono inteligente Xiaomi Redmi 7A, el texto fue traducido al ingles con el traductor de Google.

The photographs were taken with a Xiaomi Redmi 7A smartphone, the text was translated into English with the Google translator.

H2
H3
H4
3 columns
2 columns
1 column
3 Comments
Ecency